• $200.00 S&H

    Samsung CP Feeder Finger (Case of 8)

    For Samsung CP Feeders

    8 Feeder Fingers per case

     

    The CP Cut Tape Feeder Finger Solution is designed to work with Samsung’s legacy CP Feeders to make feeding component tape easier than ever. Merely push the tape into the Feeder Finger and index the feeder one time. The first component is ready to be picked. No tape leader is required, and the cover tape collection process is eliminated entirely. By simplifying the feeder loading and unloading process, feeder setup and changeover times are significantly reduced.

     

    At the end of the day, this means significantly higher productivity.

     

    Key benefits:

    • Attaches easily to your existing feeder
    • Handles cut tape as short as three inches
    • Eliminates splicing
    • Loads in less than 5 seconds
    • Eliminates cover tape jams
    • Reduces setup time by fifty-percent
    Cut Tape Feeder Finger Specification
    Typical components 0402 / 1206
    Tape Width 8 mm
    Tape depth (feeder type) 2.5 mm (8 mm)
    Tape material Paper Tape only
    Full Reel or Cut Tape Yes
    Package Weight 7 lbs
    Dimensions 14 x 12 x 6 in

     

     

    For Samsung CP Feeders
    8 Feeder Fingers per case

  • $200.00 S&H

    Samsung SM 2MM Pitch Feeder Finger (Case of 8)

    For Samsung SM 2MM Pitch Feeders

    8 Feeder Fingers per case

     

    The SM 0402 Feeder Finger is designed to work with the Samsung 2mm Pitch Pneumatic Feeders to improve feeder efficiency and significantly reduce feeder setup and change over time. The key features and benefits allow the operator to load tape strips as short as three inches or the full reel in 5 seconds with zero component loss. Eliminating the cover tape collection process eliminates feeder jams during production improving machine utilization and throughput.

     

     

    Key benefits:

    • Attaches easily to your existing feeder
    • Handles cut-tape as short as 3″ / 76.2mm
    • Eliminates splicing
    • Loads in less than 5 seconds
    • Eliminates cover tape jams
    • Reduces setup time by fifty-percent
    Cut Tape Feeder Finger Specification
    Typical components 0201 / 0402
    Tape Width 8 mm
    Tape depth (feeder type) 2.5 mm (8 mm)
    Tape material Paper only
    Full Reels or Cut Tape Yes
    Package Weight  3 lbs
    Dimensions 14 x 12 x 6 in

    For Samsung SM 2MM Pitch Feeders
    8 Feeder Fingers per case

  • $200.00 S&H

    Samsung SM Feeder Finger (Case of 8)

    For Samsung SM Pneumatic Feeders

    8 Feeder Fingers per case

     

    The SM Feeder Finger is designed to work with the Samsung SM Pneumatic Feeder to improve feeder efficiency and significantly reduce production setup and change over time. The key features and benefits allow the operator to load tape strips as short as three inches or the full reel in 5 seconds with zero component loss. Eliminating the cover tape collection process eliminates feeder jams during production improving machine utilization and throughput.

     

     

    Key benefits:

    • Attaches easily to your existing feeder
    • Handles cut-tape as short as 3″ / 76.2mm
    • Eliminates splicing
    • Loads in less than 5 seconds
    • Eliminates cover tape jams
    • Reduces setup time by fifty-percent
    Cut Tape Feeder Finger Specification
    Typical components 0603 / 1206
    Tape Width 8 mm
    Tape depth (feeder type) 2.5 mm (8 mm)
    Tape material Paper Tape only
    Full Reels or Cut Tape Yes
    Package Weight 3 lbs
    Dimensions 14 x 12 x 6 in

     

    For Samsung SM Feeders
    8 Feeder Fingers per case

  • Samsung SME Feeder Finger
    $200.00

    Samsung SME Feeder Finger (Case of 8)

    For Samsung SME Electric Feeders

    8 Feeder Fingers per case

     

    The SME Feeder Finger is designed to work with the Samsung SME Electric Feeder to improve feeder efficiency and significantly reduce production setup and change over time. The key features and benefits allow the operator to load tape strips as short as three inches or the full reel in 5 seconds with zero component loss during the initial feeder of tape. Eliminating the cover tape collection process eliminates feeder jams during production improving machine utilization and throughput.

     

    Key benefits:

    • Attaches easily to your existing feeder
    • Handles cut-tape as short as three inches
    • Eliminates splicing
    • Loads in less than 5 seconds
    • Eliminates cover tape jams
    • Reduces setup time by fifty-percent
    Cut Tape Feeder Finger Specification
    Typical components 0201 / 1206
    Tape Width 8 mm
    Tape depth (feeder type) 2.5 mm (8 mm)
    Tape material Paper Tape only
    Full Reels or Cut Tape Yes
    Weight 3 lbs
    Dimensions 14 x 12 x 6 in
  • $75.00 S&H

    Tape Dent Tool

    The Tape Dent Tool is used to prep the component tape after cutting the tape thru the sprocket hole and before inserting it into the Feeder Finger. The moon shaped dent allows the blade to easily penetrate and separate the cover tape from the paper tape.

  • $18.00 S&H

    Tape Push Tool

    The Tape Push Tool is used to advance the component tape onto the sprocket wheel. This tool is recommended for use with all tapes and one is included in each Feeder Finger kit.

  • $200.00 S&H

    Yamaha SS / YS / ZS Feeder Finger (Case of 10)

    For Yamaha SS / YS & ZS Feeders

    10 Feeder Fingers per case

     

    The YS / SS and ZS Feeder Fingers are designed to work with the Yamaha Electronic Feeders to improve feeder efficiency and increase production capacity. The key features and benefits allow an operator to load tape strips as short 3 inches or a full reel in 5 seconds with zero components loss. Eliminating the cover tape collection process eliminates feeder jams during production improving machine utilization and throughput.

     

    Key benefits:

    • Attaches easily to your existing feeder
    • Handles cut-tape as short as 3″ /76.2mm
    • Eliminates splicing
    • Loads in less than 5 seconds
    • Eliminates cover tape jams
    • Reduces setup time by fifty-percent
    Cut Tape Feeder Finger Specification
    Typical components 0201 / 1206
    Tape Width 8 mm
    Tape depth (feeder type) 2.5 mm (8 mm)
    Tape material Paper Tape
    Full Reel & Cut Tape Yes

     

    Package Weight 3 lbs
    Dimensions 14 x 12 x 6 in

     

    For Yamaha SS / YS & ZS Feeders
    10 Feeder Fingers per case