-
Fuji Feeder Finger W08C(Case of 8)
For Fuji Feeders
The Fuji Feeder Finger design works with OEM feeder models W08C & W08F.
The Fuji Feeder Finger is a precision machined tape guide designed to replace the original guide on the NXT feeders. The finger uses a plow blade to detach and fold the cover tape out of the way of the pick and place. Eliminating the cover tape routing and collection process reduces feeder setup time by 80%. The plow blade design allows the feeding of cut tape down to 1.5″ / 38.1mm without attaching a cover tape leader. The operator can load the feeder in less than five seconds without component loss at setup. There are two versions of the NXT Feeder Finger, and the green finger works with W08C feeder models. See specifications.
Key benefits:
- Attaches easily to your existing feeder
- Handles cut tape as short as 1.5″ / 38.1mm
- Eliminates splicing
- Loads in less than 5 seconds
- Eliminates cover tape jams
- Reduces feeder setup time by eighty-percent
Cut Tape Feeder Finger Specification Typical Components 0201 / 1210 Tape Width 8 mm – 8.1mm Tape pocket depth 1.4 mm (8 mm) Tape Material Paper and Embossed Tapes Full Reels or Cut Tape Yes / Cut Tape down to 1.5″ / 38.1mm minimum length Package Weight 3 lbs Dimensions 14 x 12 x 6 in -
Fuji Feeder Finger W08F (Case of 8)
For Fuji Feeders
Our Fuji Feeder Finger design works with OEM feeder models W08C & W08F.
The Fuji Feeder Finger is a precision machined tape guide designed to replace the original guide on the NXT feeders. The finger uses a plow blade to detach and fold the cover tape out of the way of the pick and place. Eliminating the cover tape routing and collection process reduces feeder setup time by 80%. The plow blade design allows the feeding of cut tape down to 1.5″ / 38.1mm without attaching a cover tape leader. The operator can load the feeder in less than five seconds without component loss at setup. There are two versions of the NXT Feeder Finger, and the red finger works with W08F feeder models. See specifications.
Key benefits:
- Attaches easily to your existing feeder
- Handles cut tape as short as 1″ / 25.4mm
- Eliminates splicing
- Loads in less than 5 seconds
- Eliminates cover tape jams
- Reduces feeder setup time by eighty-percent
Cut Tape Feeder Finger Specification Typical Components 0201 / 1210 Tape Width 8 mm – 8.10mm Tape pocket depth (feeder type) 1.4 mm (8 mm) Tape Material Paper & Embossed Tapes Full Reels or Cut Tape Yes / Cut Tape 1.5″ / 38.1mm minimum length Package Weight 3 lbs Dimensions 14 x 12 x 6 in -
Yamaha SS / YS / ZS Feeder Finger (Case of 10)
For Yamaha SS / YS & ZS Feeders
10 Feeder Fingers per kit
The YS / SS and ZS Feeder Fingers are precision machined tape guides designed to replace the original guide on Yamaha feeders. The fingers use a plow blade to detach and fold the cover tape out of the way of the pick and place, eliminating the cover tape routing and collection process. The plow blade design allows feeding of cut tape down to 1″ / 25.4mm without attaching a cover tape leader. The operator can load the feeder in less than five seconds without component loss at setup. The Feeder Finger reduces feeder setup and changeover time by 80%. The new release works with both paper and embossed tapes. See specification
Key benefits:
- Attaches easily to your existing feeder
- Handles cut tape as short as 1″ / 25.4mm
- Eliminates splicing
- Loads in less than 5 seconds
- Eliminates cover tape jams
- Reduces setup time by eighty-percent
Cut Tape Feeder Finger Specification Typical Components 0201 / 1206 Tape Width 8 mm Tape Depth (feeder type) 2.5 mm (8 mm) Tape Material Paper and Embossed Tapes Full Reel & Cut Tape Yes Package Weight 3 lbs Dimensions 14 x 12 x 6 in -
Samsung SM Feeder Finger (Case of 8)
For Samsung SM Pneumatic Feeders
8 Feeder Fingers per case
The SM Feeder Finger is designed to work with the Samsung SM Pneumatic Feeder to improve feeder efficiency and significantly reduce production setup and change over time. The key features and benefits allow the operator to load tape strips as short as 3″ / 76.2mm or the full reel in 5 seconds with zero component loss. Eliminating the cover tape collection process eliminates feeder jams during production improving machine utilization and throughput.
Key benefits:
- Attaches easily to your existing feeder
- Handles cut-tape as short as 3″ / 76.2mm
- Eliminates splicing
- Loads in less than 5 seconds
- Eliminates cover tape jams
- Reduces setup time by fifty-percent
Cut Tape Feeder Finger Specification Typical components 0603 / 1206 Tape Width 8 mm Tape depth (feeder type) 2.5 mm (8 mm) Tape material Paper Tape only Full Reels or Cut Tape Yes Package Weight 3 lbs Dimensions 14 x 12 x 6 in -
Europlacer Feeder Finger
For Europlace ii-A1 and ii-A2 and iineo+ machines
The Europlacer Feeder Finger makes feeding component tape easier than ever. The plow blade design allows feeding of cut tape as short as 1.5″/ 38.1mm without attaching a cover tape leader. Merely push the tape into the Feeder Finger and place the feeder onto the Cart. The first component is ready to be picked. The blow blade design simplifies tape loading and eliminates the cover tape collection process.
Key benefits:
- Design to function with the iifeeder Cart
- Handles cut tape as short as 1.5″ / 38.1mm
- Eliminates splicing
- Loads in less than 5 seconds
- Eliminates cover tape issues
- Reduces feeder setup time by eighty-percent
Cut Tape Feeder Finger Specification Typical components 0201 / 1206 Tape Width 8 mm Tape depth (feeder type) 2.5 mm (8 mm) Tape material Paper and Embossed Tapes Full Reel or Cut Tape Yes, Cut Tape Length 1.5″ /38.1mm Package Weight 1 lb Dimensions 14 x 12 x 6 in -
Samsung SM 2MM Pitch Feeder Finger (Case of 8)
For Samsung SM 2MM Pitch Feeders
8 Feeder Fingers per case
The SM 0402 Feeder Finger is designed to work with the Samsung 2mm Pitch Pneumatic Feeders to improve feeder efficiency and significantly reduce feeder setup and change over time. The key features and benefits allow the operator to load tape strips as short as three inches or the full reel in 5 seconds with zero component loss. Eliminating the cover tape collection process eliminates feeder jams during production improving machine utilization and throughput.
Key benefits:
- Attaches easily to your existing feeder
- Handles cut-tape as short as 3″ / 76.2mm
- Eliminates splicing
- Loads in less than 5 seconds
- Eliminates cover tape jams
- Reduces setup time by fifty-percent
Cut Tape Feeder Finger Specification Typical components 0201 / 0402 Tape Width 8 mm Tape depth (feeder type) 2.5 mm (8 mm) Tape material Paper only Full Reels or Cut Tape Yes Package Weight 3 lbs Dimensions 14 x 12 x 6 in -
Samsung / Hanwha SME Feeder Finger (Case of 8)
For SME Electric Feeders
8 Feeder Fingers per kit
The SME Feeder Finger is designed to work with the SME Electric Feeder to improve feeder efficiency and significantly reduce production setup and change over time. The key features and benefits allow the operator to load tape strips as short as 3″ / 76.5mm or the full reel in 5 seconds with no component loss at feeder setup. Eliminating the cover tape collection process eliminates feeder jams during production improving machine utilization and throughput.
Key benefits:
- Attaches easily to your existing feeder
- Handles cut tape as short as 3″ / 76.5mm
- Eliminates splicing
- Loads in less than 5 seconds
- Eliminates cover tape jams
- Reduces setup time by fifty-percent
Cut Tape Feeder Finger Specification Typical Components 0201 / 1206 Tape Width 8 mm Tape depth (feeder type) 2.5 mm (8 mm) Tape Material Paper and Embossed Tapes Full Reels or Cut Tape Yes Weight 3 lbs Dimensions 14 x 12 x 6 in -
Juki RF08AS Feeder Finger (Case of 10)
For Juki RF08AS Feeders
10 Feeder Fingers per case
Using the RF08AS Feeder Finger requires a firmware upgrade from Juki Automation Systems, Inc.
ATS designed the RF08AS Feeder Finger in conjunction with Juki Automation Systems to work with the New RS1 pick and place machine. The Feeder Finger, coupled with the new RF08AS electronic feeder, adds critical features and benefits that improve machine utilization and throughput. An unskilled operator can load tape strips as short as 3” /76.2mm or a full reel without a cover tape leader or tape splicing. The cover tape collection process and cover tape feeder jams are eliminated. The operator merely pushes the component tape into the feeder and places it onto the pick and place or feeder cart improving production setup time by 80%.
Key benefits:
- Attaches easily to your existing feeder
- Handles cut-tape as short as 3″ / 76.2mm
- Eliminates tape splicing
- Loads in less than 5 seconds
- Eliminates cover tape jams
- Reduces setup time by eighty-percent
Cut Tape Feeder Finger Specification Typical components 0201 / 1206 Tape Width 8 mm Tape depth (feeder type) 2.5 mm (8 mm) Tape material Paper Tape only Full Reels or Cut Tape Yes Package Weight 3 lbs Dimensions 14 x 12 x 6 in -
Juki CF081ER Feeder Finger(Case of 8)
Works with Juki CF081ER Feeders
8 Feeder Fingers per kit
The Juki Feeder Fingers are precision machined tape guides designed to replace the original guide on Juki feeders. The finger uses a plow blade to detach and fold the cover tape out of the way of the pick and place, eliminating the cover tape routing and collection process. The plow blade design allows feeding of cut tape down to 1″ / 25.4mm. The operator can load the feeder in less than five seconds without component loss at setup. The Feeder Finger reduces feeder setup and changer time by 80%. See specification
Key benefits:
- Attaches easily to your existing feeder
- Handles tape strips as short as 1.5″ / 38.1mm
- Eliminates cover tape splicing
- Loads in less than 5 seconds
- Eliminates cover tape jams
- Reduces setup time by eighty-percent
Cut Tape Feeder Finger Specification Typical Components 0603 – 1206 Tape Width 8 mm Tape depth (feeder type) 2.5 mm (8 mm) Tape Material Embossed and Paper Tapes Full Reels and Cut Tape Yes Package Weight 3 lbs Dimensions 14 x 12 x 6 in -
Juki CF081E Feeder Finger (Case of 8)
For Juki CF081E Feeders
8 Feeder Fingers per kit
The CF Feeder Fingers add a new dimension to Juki mechanical feeders.
Installing the Feeder Finger provides cut tape relief for tape as short as 1.5″ / 38.2mm without attaching a cover tape leader. Removing the cover tape collection process eliminates feeder jams and machine stops during production. Terminating the mechanical mechanisms for collecting the cover tape reduces feeder maintenance.
Key benefits:
- Attaches easily to your existing feeder
- Handles cut tape as short as 1.5″ /38.2mm
- Eliminates splicing
- Loads in less than 5 seconds
- Eliminates cover tape jams
- Reduces setup time by eighty-percent
Cut Tape Feeder Finger Specification Typical Components 0603 – 1210 Tape Width 8 mm Tape depth (feeder type) 2.5 mm (8 mm) Tape Material Paper Tape Only Full Reels or Cut Tape Yes Package Weight 1 lbs Dimensions 14 x 12 x 6 in -
Juki AF081E Feeder Finger (Case of 8)
Works With Juki AF081E, AF05HP and AQ02HP Feeders
8 Feeder Fingers per case
The AF08 Feeder Finger was designed in conjunction with Juki Automation Systems to work with the AF081E mechanical feeder (blue handle) and the AF05HP & AQ02HP 2mm pitch feeders.
The AF feeder is Juki’s spliceable feeder, installing the Feeder Finger removes the cover tape tension issues associated with this feeder while providing a solution for feeding short strips of paper tape without attaching a cover tape leader. Eliminating the cover tape collection process eliminates feeder jams during production improving machine utilization and throughput. Eliminating the cover tape collection mechanism reduces feeder maintenance.
Key benefits:
- Attaches easily to your existing feeder
- Handles tape strips as short as 3″ /76.2mm
- Eliminates splicing
- Loads in less than 5 seconds
- Eliminates cover tape jams
- Reduces setup time by fifty-percent
Cut Tape Feeder Finger Typical components 0201 – 1206 Tape Width 8 mm Tape depth (feeder type) 2.5 mm (8 mm) Tape material Paper Tape only Full Reels or Cut Tape Yes Package Weight 3 lbs Dimensions 14 x 12 x 6 in -
$75.00 S&HTape Dent Tool
The Tape Dent Tool is used to prep the component tape after cutting the tape thru the sprocket hole and before inserting it into the Feeder Finger. The moon shaped dent allows the blade to easily penetrate and separate the cover tape from the paper tape.
-
$18.00 S&HTape Push Tool
The Tape Push Tool is used to advance the component tape onto the sprocket wheel. This tool is recommended for use with all tapes and one is included in each Feeder Finger kit.
-
Panasonic CM Feeder Finger (Case of 8)
For Panasonic CM Feeders
The Panasonic CM Feeder Finger is designed to work with feeders compatible with Panasonic’s CM series pick and place machines.
The CM Feeder Finger, coupled with the Panasonic 8mm dual-track feeder adds patented features and benefits that increase production capacity by 150% by reducing feeder setup and change over time. The operator can load tape strips as short as 3″ / 76.2mm or a full reel by merely pushing the tape into the feeder and placing it onto the pick and place or feeder cart. A tape leader is no longer required, and the feeder can be loaded in less than 5 seconds. Removing the cover tape collection process eliminates feeder jams and significantly reduces feeder maintenance costs.
Key benefits:
- Attaches easily to your existing feeder
- Handles tape strips as short as 3″ / 76.2mm
- Eliminates splicing
- Loads in less than 5 seconds
- Eliminates cover tape jams
- Reduces setup time by fifty-percent
Cut Tape Feeder Finger Specification Typical components 0402 / 1206 Tape Width 8 mm Tape depth (feeder type) 2.5 mm (8 mm) Tape material Paper Tape only Full Reels or Cut Tape Yes Package Weight 3 lbs Dimensions 14 x 12 x 6 in -
ASM Siplace X Feeder Finger (Case of 8)
For ASM Siplace X Smart Feeders
The ASM Siplace Feeder Finger is designed to work with the new Siplace Smart Feeder.
The Feeder Finger, coupled with the Siplace Smart Feeder, adds key features and benefits that improve machine utilization and throughput. An unskilled operator can load tape strips as short as 3 inches or a full reel by merely pushing the tape into the feeder and placing it onto the pick and place or feeder cart. A tape leader is no longer required, and the feeder can be loaded in 5 seconds. Eliminating the cover tape collection process eliminates feeder jams during production improving machine utilization and throughput.
Key benefits:
- Attaches easily to your existing feeder
- Handles tape strips as short as 3″ / 76.2mm
- Eliminates splicing
- Loads in less than 5 seconds
- Eliminates cover tape jams
- Reduces setup time by fifty-percent
Cut Tape Feeder Finger Specification Typical components 0201 / 1206 Tape Width 8 mm Tape depth (feeder type) 2.5 mm (8 mm) Tape material Paper Tape only Full Reels or Cut Tape Yes Package Weight 3 lbs Dimensions 14 x 12 x 6 in
