• $1,600.00 S&H

    Yamaha SS / YS / ZS Feeder Finger

    For Yamaha SS / YS & ZS Feeders

    8 Feeder Fingers per case

     

    The YS / SS and ZS Feeder Finger Solution is designed to work with Yamaha’s Electronic Feeders to improve the feeder’s efficiency and significantly reduce feeder setup and change over time. The Feeder Finger coupled with the advantages of the electric motor upgrade the YS / SS and ZS Feeders to autoload status. Merely push the component tape into the Feeder and place it on the pick and place. The tape leader is no longer required, and the cover tape collection process is eliminated. Your feeders can now be loaded and unloaded in seconds, reducing production setup time by as much as fifty percent.

     

     

    Key benefits:

    • Attaches easily to your existing feeder
    • Handles cut tape as short as three inches
    • Eliminates splicing
    • Loads in less than 5 seconds
    • Eliminates cover tape jams
    • Reduces setup time by fifty-percent
    Cut Tape Feeder Finger Specification
    Typical components 0201 / 1206
    Tape Width 8 mm
    Tape depth (feeder type) 2.5 mm (8 mm)
    Tape material Paper Tape & Heat Sealed Plastic Tapes
    Full Reel & Cut Tape Yes
    Package Weight 7 lbs
    Dimensions 14 x 12 x 6 in

     

    For Yamaha SS / YS & ZS Feeders
    8 Feeder Fingers per case

  • $1,600.00 S&H

    Samsung SM Feeder Finger

    For Samsung SM Pneumatic Feeders

    8 Feeder Fingers per case

     

    The SM Feeder Finger Solution is designed to work with the Samsung SM Pneumatic Feeder to improve the feeders efficiency and significantly reduce feeder setup and change over time. The operator now can feed cut component tape as short as three inches or a full reel. Merely push the component tape into the feeder and place it onto your pick and place. A tape leader is no longer required, and no parts are lost on the initial feed of tape.

     

    Reduce production setup time by fifty-percent with the SM Cut Tape Feeder Finger Solution.

     

    Key benefits:

    • Attaches easily to your existing feeder
    • Handles cut tape as short as three inches
    • Eliminates splicing
    • Loads in less than 5 seconds
    • Eliminates cover tape jams
    • Reduces setup time by fifty-percent
    Cut Tape Feeder Finger Specification
    Typical components 0603 / 1206
    Tape Width 8 mm
    Tape depth (feeder type) 2.5 mm (8 mm)
    Tape material Paper Tape only
    Full Reels or Cut Tape Yes
    Weight 7 lbs
    Dimensions 14 x 12 x 6 in

     

    For Samsung SM Feeders
    8 Feeder Fingers per case

  • $1,600.00 S&H

    Samsung CP Feeder Finger

    For Samsung CP Feeders

    8 Feeder Fingers per case

     

    The CP Cut Tape Feeder Finger Solution is designed to work with Samsung’s legacy CP Feeders to make feeding component tape easier than ever. Merely push the tape into the Feeder Finger and index the feeder one time. The first component is ready to be picked. No tape leader is required, and the cover tape collection process is eliminated entirely. By simplifying the feeder loading and unloading process, feeder setup and changeover times are significantly reduced.

     

    At the end of the day, this means significantly higher productivity.

     

    Key benefits:

    • Attaches easily to your existing feeder
    • Handles cut tape as short as three inches
    • Eliminates splicing
    • Loads in less than 5 seconds
    • Eliminates cover tape jams
    • Reduces setup time by fifty-percent
    Cut Tape Feeder Finger Specification
    Typical components 0402 / 1206
    Tape Width 8 mm
    Tape depth (feeder type) 2.5 mm (8 mm)
    Tape material Paper Tape only
    Full Reel or Cut Tape Yes
    Package Weight 7 lbs
    Dimensions 14 x 12 x 6 in

     

     

    For Samsung CP Feeders
    8 Feeder Fingers per case

  • $1,600.00 S&H

    IPulse F3 Feeder Finger

    For I-Pulse F3 Feeders

    8 Feeder Fingers per case

     

    The IPE Cut Tape Feeder Finger Solution is designed to work with the iPulse F3 Electronic Feeders to improve the feeder’s efficiency and significantly reduce feeder setup and change over time. The Feeder Finger coupled with the advantages of the electric motor upgrade the F3 Feeder to autoload status. Merely push the component tape into the feeder and place it onto the pick and place. The tape leader is no longer required, and the cover tape collection process is eliminated. Your feeders can now be loaded and unloaded in seconds, reducing production setup time by as much as fifty percent.

     

    Key benefits:

    • Attaches easily to your existing feeder
    • Handles cut tape as short as three inches
    • Eliminates splicing
    • Loads in less than 5 seconds
    • Eliminates cover tape jams
    • Reduces setup time by fifty-percent
    Cut Tape Feeder Finger Specification
    Typical components 0201 / 1206
    Tape Width 8 mm
    Tape depth (feeder type) 2.5 mm (8 mm)
    Tape material Paper Tape & Heat Sealed Plastic Tape
    Full Reels or Cut Tape Yes
    Package Weight 7 lbs
    Dimensions 14 x 12 x 6 in

     

    For I-Pulse F3 Feeders
    8 Feeder Fingers per case

  • $1,600.00 S&H

    Samsung SM 2MM Pitch Feeder Finger

    For Samsung SM 2MM Pitch Feeders

    8 Feeder Fingers per case

     

    The SM 0402 Cut Tape Feeder Finger is designed to work with Samsung’s SM 2mm Pitch Pneumatic Feeders to improve the feeder’s efficiency and significantly reduce feeder setup and change over time. The operator now can load a strip of tape as short as three inches or a full reel in less than five seconds. No tape leader is required, and little to no parts are lost on the initial feed of tape.

     

    Experience ultimate convenience while saving time with the SM 0402 Cut Tape Feeder Finger.

     

     

    Key benefits:

    • Attaches easily to your existing feeder
    • Handles cut tape as short as three inches
    • Eliminates splicing
    • Loads in less than 5 seconds
    • Eliminates cover tape jams
    • Reduces setup time by fifty-percent
    Cut Tape Feeder Finger Specification
    Typical components 0201 / 0402
    Tape Width 8 mm
    Tape depth (feeder type) 2.5 mm (8 mm)
    Tape material Paper only
    Full Reels or Cut Tape Yes
    Package Weight 7 lbs
    Dimensions 14 x 12 x 6 in

    For Samsung SM 2MM Pitch Feeders
    8 Feeder Fingers per case

  • Samsung SME Feeder Finger
    $1,600.00

    Samsung SME Feeder Finger

    For Samsung SME Electric Feeders

    8 Feeder Fingers per case

     

    The SME Feeder Finger Solution is designed to work with the Samsung SME Electric Feeder to improve the feeders efficiency and significantly reduce feeder setup and change over time. The operator now can feed cut component tape as short as three inches or a full reel. Merely push the component tape into the feeder and place it onto the pick and place. A tape leader is no longer required, and no parts are lost on the initial feed of tape.

     

    Reduce production setup time by fifty-percent with the SME Cut Tape Feeder Finger Solution.

     

    Key benefits:

    • Attaches easily to your existing feeder
    • Handles cut tape as short as three inches
    • Eliminates splicing
    • Loads in less than 5 seconds
    • Eliminates cover tape jams
    • Reduces setup time by fifty-percent
    Cut Tape Feeder Finger Specification
    Typical components 0201 / 1206
    Tape Width 8 mm
    Tape depth (feeder type) 2.5 mm (8 mm)
    Tape material Paper Tape only
    Full Reels or Cut Tape Yes
    Weight 7 lbs
    Dimensions 14 x 12 x 6 in
  • Juki RF08FF Feeder Finger

    Juki Feeder Finger products are distributed exclusively by Juki Automation Systems, Inc.

     

    Contact your Juki representative for more information.

     

    Weight 7 lbs
    Dimensions 14 x 12 x 6 in
  • Juki EF08FF Feeder Finger

    Juki EF08FF Feeder Finger

    Juki Feeder Finger products are distributed exclusively by Juki Automation Systems, Inc.

     

    Contact your Juki representative for more information.

     

    Weight 7 lbs
    Dimensions 14 x 12 x 6 in
  • Juki CF08FF Feeder Finger

    Juki CF08FF Feeder Finger

    Juki Feeder Finger products are distributed exclusively by Juki Automation Systems, Inc.

     

    Contact your Juki representative for more information.

     

    Weight 7 lbs
    Dimensions 14 x 12 x 6 in
  • Juki AF05FF Feeder Finger

    Juki AF05FF Feeder Finger

    Juki Feeder Finger products are distributed exclusively by Juki Automation Systems, Inc.

     

    Contact your Juki representative for more information.

     

    Weight 7 lbs
    Dimensions 14 x 12 x 6 in
  • Juki AF08FF Feeder Finger

    Juki AF08FF Feeder Finger

    Juki Feeder Finger products are distributed exclusively by Juki Automation Systems, Inc.

     

    Contact your Juki representative for more information.

     

    Weight 7 lbs
    Dimensions 14 x 12 x 6 in
  • Essemtec Feeder Finger

    Essemtec Feeder Finger

    The Essemtec Feeder Finger Solution is in Development.

     

    Weight 7 lbs
    Dimensions 14 x 12 x 6 in
  • $75.00 S&H

    Tape Dent Tool

    The Tape Dent Tool is used to crimp the component tape before inserting it into the Feeder Finger. The moon shaped dent allows the blade to quickly penetrate and separate the cover tape from the component tape.

  • $18.00 S&H

    Tape Push Tool

    The Tape Push Tool is used to advance the component tape onto the sprocket wheel. This tool is recommended for use with all tapes.

  • Panasonic CM Feeder Finger

    Panasonic CM Feeder Finger

    The Panasonic CM Cut Tape Solution is in Development.

     

    Package Weight 7 lbs
    Dimensions 14 x 12 x 6 in
  • ASM Siplace X Feeder Finger

    ASM Siplace X Feeder Finger

    The ASM Siplace X Feeder Finger is in Development.

     

    Weight 7 lbs
    Dimensions 14 x 12 x 6 in