• ASM Siplace X Feeder Finger

    ASM Siplace X Feeder Finger (Case of 8)

    For ASM Siplace X Smart Feeders

     

    Request a Demo to Beta Test This Product

     

    The ASM Siplace X Feeder Finger Solution is designed to work with the Siplace X Smart Feeder.

    The Feeder Finger coupled with the Siplace X Smart Feeder adds patented features and benefits that enhance machine utilization and throughput by reducing feeder preparation time by 50%. An unskilled operator can load tape strips as short as three inches or a full reel without a cover tape leader or tape splicing in 5 seconds. The cover tape collection process and cover tape feeder jams are eliminated. The operator merely pushes the component tape into the feeder and places it onto the pick and place or feeder cart.

     

    Key benefits:

    • Attaches easily to your existing feeder
    • Handles tape strips as short as 3″ / 76.2mm
    • Eliminates splicing
    • Loads in less than 5 seconds
    • Eliminates cover tape jams
    • Reduces setup time by fifty-percent
    Cut Tape Feeder Finger Specification
    Typical components 0201 / 1206
    Tape Width 8 mm
    Tape depth (feeder type) 2.5 mm (8 mm)
    Tape material Paper Tape only
    Full Reels or Cut Tape Yes

     

    Package Weight 7 lbs
    Dimensions 14 x 12 x 6 in

    For ASM Siplace X Feeders
    8 Feeder Fingers per case

  • Essemtec Feeder Finger

    Essemtec Feeder Finger (Case of 8)

    The Essemtec Feeder Finger Solution is in Development.

     

    Weight 7 lbs
    Dimensions 14 x 12 x 6 in
  • $1,600.00 S&H

    IPulse F3 Feeder Finger (Case of 8)

    For I-Pulse F3 Feeders

    8 Feeder Fingers per case

     

    The IPE Feeder Finger Solution is designed to work with the iPulse F3 Electronic Feeders to improve the feeder’s efficiency and significantly reduce feeder setup and change over time. The Feeder Finger coupled with the advantages of the electric motor upgrade the F3 Feeder to autoload status. Merely push the component tape into the feeder and place it onto the pick and place. The tape leader is no longer required, and the cover tape collection process is eliminated. Your feeders can now be loaded and unloaded in seconds, reducing production setup time by as much as fifty percent.

     

    Key benefits:

    • Attaches easily to your existing feeder
    • Handles cut tape as short as 3″ / 76.2mm
    • Eliminates splicing
    • Loads in less than 5 seconds
    • Eliminates cover tape jams
    • Reduces setup time by fifty-percent
    Cut Tape Feeder Finger Specification
    Typical components 0201 / 1206
    Tape Width 8 mm
    Tape depth (feeder type) 2.5 mm (8 mm)
    Tape material Paper Tape & Heat Sealed Plastic Tape
    Full Reels or Cut Tape Yes
    Package Weight 7 lbs
    Dimensions 14 x 12 x 6 in

     

    For I-Pulse F3 Feeders
    8 Feeder Fingers per case

  • Juki AF05FF Feeder Finger

    Juki AF05FF Feeder Finger (Case of 8)

    For Juki AF05HP Feeders

    8 Feeder Fingers per case

     

    Contact us to request a quote.

     

    The AF Feeder Finger was designed in conjunction with Juki Automation Systems to work with the AF05HP 2mm pitch mechanical feeder (green handle)

    The AF feeder is Juki’s spliceable feeder, installing the Feeder Finger eliminates the cover tape tension problems associated with this feeder. The patented features and benefits of the Feeder Finger design allows the operator to load tape strips as short as three inches or a full reel without a leader. Removing the cover tape collection process eliminates feeder jams and enhances machine utilization and throughput.  Feeder maintenance is also reduced by eliminating the cover tape collection mechanism.

     

    If the AF feeder is utilized in your facility waiting for a job requiring a spliceable feeder install the AF Feeder Finger and place the feeder into everyday use.

     

     

    Key benefits:

    • Attaches easily to your existing feeder
    • Handles cut tape as short as 3″ /76.2mm
    • Eliminates splicing
    • Loads in less than 5 seconds
    • Eliminates cover tape jams
    • Reduces setup time by fifty-percent
    Cut Tape Feeder Finger Specification
    Typical components 0201 / 0402
    Tape Width 8 mm
    Tape depth (feeder type) 2.5 mm (8 mm)
    Tape material Paper Tape only
    Full Reels or Cut Tape Yes

     

    Package Weight 7 lbs
    Dimensions 14 x 12 x 6 in

     

    For Juki AF05HP Feeders
    8 Feeder Fingers per case

  • Juki AF08FF Feeder Finger

    Juki AF08FF Feeder Finger (Case of 8)

    For Juki AF081E Feeders

    8 Feeder Fingers per case

     

    Contact us to request a quote.

     

    The AF Feeder Finger was designed in conjunction with Juki Automation Systems to work with the AF081E mechanical feeder (blue handle) The AF feeder is Juki’s spliceable feeder, installing the Feeder Finger eliminates the cover tape tension problems associated with this feeder. The patented features and benefits of the Feeder Finger design allows the operator to load tape strips as short as three inches or a full reel without a leader. Removing the cover tape collection process eliminates feeder jams and enhances machine utilization and throughput.  Feeder maintenance is also reduced by eliminating the cover tape collection mechanism.

     

    If the AF feeder is utilized in your facility waiting for a job requiring a spliceable feeder install the AF Feeder Finger and place the feeder into everyday use.

     

    Key benefits:

    • Attaches easily to your existing feeder
    • Handles tape strips as short as 3″ /76.2mm
    • Eliminates splicing
    • Loads in less than 5 seconds
    • Eliminates cover tape jams
    • Reduces setup time by fifty-percent
    Cut Tape Feeder Finger Specification
    Typical components 0603 / 1206
    Tape Width 8 mm
    Tape depth (feeder type) 2.5 mm (8 mm)
    Tape material Paper Tape only
    Full Reels or Cut Tape Yes

     

    Package Weight 7 lbs
    Dimensions 14 x 12 x 6 in

     

    For Juki AF081E Feeders
    8 Feeder Fingers per case

  • Juki CF08FF Feeder Finger

    Juki CF08FF Feeder Finger (Case of 8)

    For Juki CF081ER Feeders

    8 Feeder Fingers per case

     

    Contact us to request a quote.

     

    The CF08 Feeder Finger was designed in conjunction with Juki Automation Systems to work with the CF081ER mechanical feeder (blue handle) The Feeder Finger coupled with the CF feeder reduces set-up time by 50% and eliminates the problematic process of spooling the cover tape. The patented features and benefits of the Feeder Finger design allows the operator to load tape strips as short as three inches or a full reel without a leader. Removing the cover tape collection process eliminates feeder jams and enhances machine utilization and throughput.  Feeder maintenance is also reduced by eliminating the cover tape collection mechanism.

     

    The CF Feeder Finger works with both 2mm and 4mm paper tape feeders.

     

    Key benefits:

    • Attaches easily to your existing feeder
    • Handles tape strips as short as 3″ / 76.2mm
    • Eliminates splicing
    • Loads in less than 5 seconds
    • Eliminates cover tape jams
    • Reduces setup time by fifty-percent
    Cut Tape Feeder Finger Specification
    Typical components 0201 / 1206
    Tape Width 8 mm
    Tape depth (feeder type) 2.5 mm (8 mm)
    Tape material Paper Tape only
    Full Reels or Cut Tape Yes

     

    Package Weight 7 lbs
    Dimensions 14 x 12 x 6 in

     

    For Juki CF081ER Feeders
    8 Feeder Fingers per case

  • Juki EF08FF Feeder Finger

    Juki EF08FF Feeder Finger (Case of 8)

    For Juki EF08HSR Feeders

    8 Feeder Fingers per case

     

    The EF08HSR Feeder Finger is distributed exclusively by Juki Automation Systems, Inc.

     

    Contact your Juki representative for more information.

     

    The EF Feeder Finger Solution was designed in conjunction with Juki Automation Systems to work with the EF08HSR electronic feeder (black handle) The Feeder Finger coupled with the EF08HSR feeder adds patented features and benefits that enhance machine utilization and throughput by reducing feeder preparation time by as much as 50%. An unskilled operator can load tape strips as short as three inches or a full reel without a cover tape leader or tape splicing. The cover tape collection process and cover tape feeder jams are eliminated. The operator merely pushes the component tape into the feeder and places it onto the pick and place or feeder cart.

     

    Key benefits:

    • Attaches to existing feeder Juki Installation required
    • Handles tape strips as short as 3″/ 76.2mm
    • Eliminates splicing
    • Loads in less than 5 seconds
    • Eliminates cover tape jams
    • Reduces setup time by fifty-percent
    Cut Tape Feeder Finger Specification
    Typical components 0201 / 1206
    Tape Width 8 mm
    Tape depth (feeder type) 2.5 mm (8 mm)
    Tape material Paper Tape only
    Full Reels or Cut Tape Yes

     

    Package Weight 7 lbs
    Dimensions 14 x 12 x 6 in

     

    For Juki EF08HSR Feeders
    8 Feeder Fingers per case

  • Juki RF08FF Feeder Finger (Case of 8)

    For Juki RF08AS Feeders

    10 Feeder Fingers per case

     

    Contact us to request a quote.

     

    The RF Feeder Finger was designed in conjunction with Juki Automation Systems to work with the New RS1 pick and place machine. The Feeder Finger coupled with the new RF08AS electronic feeder adds patented features and benefits that enhance machine utilization and throughput. An unskilled operator can load tape strips as short as three inches or a full reel without a cover tape leader or tape splicing. The cover tape collection process and cover tape feeder jams are eliminated. The operator merely pushes the component tape into the feeder and places it onto the pick and place or feeder cart reducing production setup time by 50%.

     

    Key benefits:

    • Attaches easily to your existing feeder
    • Handles cut tape as short as 3″ / 76.2mm
    • Eliminates tape splicing
    • Loads in less than 5 seconds
    • Eliminates cover tape jams
    • Reduces setup time by fifty-percent
    Cut Tape Feeder Finger Specification
    Typical components 0201 / 1206
    Tape Width 8 mm
    Tape depth (feeder type) 2.5 mm (8 mm)
    Tape material Paper Tape only
    Full Reels or Cut Tape Yes

     

    Package Weight 7 lbs
    Dimensions 14 x 12 x 6 in

     

    For Juki RF08AS Feeders
    10 Feeder Fingers per case

  • Panasonic CM Feeder Finger

    Panasonic CM Feeder Finger (Case of 8)

    For Panasonic CM and NPM Feeders

     

    The Panasonic CM Feeder Finger Solution is designed to work with feeders compatible with Panasonic’s CM and NPM series pick and place machines.

    The Feeder Finger coupled with Panasonic’s 8mm dual-track feeder adds patented features and benefits that enhance machine utilization and throughput by reducing feeder preparation time by 50%. An unskilled operator can load tape strips as short as three inches or a full reel without a cover tape leader or tape splicing in 5 seconds. The cover tape collection process and cover tape feeder jams are eliminated. The operator merely pushes the component tape into the feeder and places it onto the pick and place or feeder cart.

     

    Key benefits:

    • Attaches easily to your existing feeder
    • Handles tape strips as short as 3″ / 76.2mm
    • Eliminates splicing
    • Loads in less than 5 seconds
    • Eliminates cover tape jams
    • Reduces setup time by fifty-percent
    Cut Tape Feeder Finger Specification
    Typical components 0201 / 1206
    Tape Width 8 mm
    Tape depth (feeder type) 2.5 mm (8 mm)
    Tape material Paper Tape only
    Full Reels or Cut Tape Yes
    Package Weight 7 lbs
    Dimensions 14 x 12 x 6 in

    For Panasonic CM Feeders
    8 Feeder Fingers per case