• Fuji Leaderless SMT Feeder W08F

    Fuji Leaderless Feeder W08F (Case of 8)

     

    The Leaderless Feeder option is now available for Fuji W08F feeders.

    The Fuji Feeder Finger is a precisely engineered tape guide that converts your W08F model feeder into a Leaderless Feeder. The Leaderless feeder features a plow blade design that detaches and folds the cover tape out of the way of the pick-and-place mechanism. Eliminating the cover tape routing and collection process can reduce feeder setup time by up to 80%. Moreover, the plow blade design allows the feeding of cut tape down to 1.5″ / 38.1mm without the need to attach a cover tape leader. During setup, the operator can load paper or embossed tapes without component loss in less than five seconds.

     

    Key benefits:

    • Attaches easily to your existing feeder
    • Handles cut tape as short as 1″ / 25.4mm
    • Eliminates splicing
    • Loads in less than 5 seconds
    • Eliminates cover tape jams
    • Reduces feeder setup time by eighty-percent
    Cut Tape Feeder Finger Specification
    Typical Components 0201 / 1210
    Tape Width 8 mm – 8.10mm
    Tape pocket depth (feeder type) 1.4 mm (8 mm)
    Tape Material Paper & Embossed Tapes
    Full Reels or Cut Tape Yes / Cut Tape 1.5″ / 38.1mm minimum length

     

    Package Weight 3 lbs
    Dimensions 14 x 12 x 6 in

    For Fuji Feeders
    8 Feeder Fingers per kit

  • $18.00 S&H

    Tape Push Tool

    The Tape Push Tool is used to advance the component tape onto the sprocket wheel. This tool is recommended for use with all tapes and one is included in each Feeder Finger kit.

  • Fuji Leaderless Feeder W08C

    Fuji Leaderless Feeder W08C(Case of 8)

     

    The Leaderless Feeder option is now available for Fuji W08C feeders.

    The Fuji Feeder Finger is a precisely engineered tape guide that converts your W08C model feeder into a Leaderless Feeder. The Leaderless feeder features a plow blade design that detaches and folds the cover tape out of the way of the pick-and-place mechanism. Eliminating the cover tape routing and collection process can reduce feeder setup time by up to 80%. Moreover, the plow blade design allows the feeding of cut tape down to 1.5″ / 38.1mm without the need to attach a cover tape leader. During setup, the operator can load paper or embossed tapes without component loss in less than five seconds.

     

    Key benefits:

    • Attaches easily to your existing feeder
    • Handles cut tape as short as 1.5″ / 38.1mm
    • Eliminates splicing
    • Loads in less than 5 seconds
    • Eliminates cover tape jams
    • Reduces feeder setup time by eighty-percent
    Cut Tape Feeder Finger Specification
    Typical Components 0201 / 1210
    Tape Width 8 mm – 8.1mm
    Tape pocket depth 1.4 mm (8 mm)
    Tape Material Paper and Embossed Tapes
    Full Reels or Cut Tape Yes / Cut Tape down to 1.5″ / 38.1mm minimum length
    Package Weight 3 lbs
    Dimensions 14 x 12 x 6 in

    For Fuji Feeders
    8 Feeder Fingers per kit

  • Juki Leaderless Feeder Finger

    Juki RF08AS Leaderless Feeder(Case of 10)

    For Juki RF08AS Feeders

    10 Feeder Fingers per case

     

    The Juki RF08AS Leaderless Feeder Finger is an innovative tool that eliminates the need for cover tape leaders when feeding entire reels and cut tape strips. It uses a plow blade design to fold and crease the cover tape flat as it moves through the Juki feeder. Compared to the original equipment, the Leaderless feeder is more flexible and can handle shorter tape strips of varying lengths, as short as one inch, for chips packaged in paper or embossed 8mm tape. Its push-and-go solution reduces the feeder setup time by 80%, making it an essential tool for Juki pick and place users.

     

    Key benefits:

    • Attaches easily to your existing feeder
    • Handles cut tape as short as 3″ / 76.2mm
    • Eliminates tape splicing
    • Loads in less than 5 seconds
    • Eliminates cover tape jams
    • Reduces setup time by eighty-percent
    Cut Tape Feeder Finger Specification
    Typical components 0201 / 1206
    Tape Width 8 mm
    Tape depth (feeder type) 2.5 mm (8 mm)
    Tape material Paper and Plastic Tapes
    Full Reels or Cut Tape Yes

     

    Package Weight 3 lbs
    Dimensions 14 x 12 x 6 in

     

    For Juki RF08AS Feeders
    10 Feeder Fingers per case

  • Juki Leaderless SMT Feeders

    Juki Leaderless Feeder CF081ER(Case of 8)

    Works with Juki CF081ER Feeders

    8 Feeder Fingers per kit

     

    We are pleased to introduce the Juki SMT Leaderless Feeder Finger, a revolutionary device that can significantly simplify and enhance your existing feeder system. With its advanced plow blade design, this game-changing device can easily convert your Juki legacy feeders into Leaderless Feeders.

     

    The Leaderless Feeder Finger’s innovative design eliminates the need for cover tape routing and collection, making it possible to feed cut tapes down to 1 inch or 25.4mm without requiring a cover tape leader. Additionally, loading paper or embossed tape takes less than five seconds and does not result in any loss of components during setup.

     

    The Leaderless Feeder Finger can significantly reduce feeder setup and changeover time by up to 80%, making it an invaluable addition to your production line. This device is a reliable and innovative solution that can simplify your manufacturing process and make it more efficient. It is highly recommended for SMT manufacturers who want to upgrade their legacy feeders and take their production line to the next level.

     

     

    Key benefits:

    • Attaches easily to your existing feeder
    • Handles tape strips as short as 1.5″ / 38.1mm
    • Eliminates cover tape splicing
    • Loads in less than 5 seconds
    • Eliminates cover tape jams
    • Reduces setup time by eighty-percent
    Cut Tape Feeder Finger Specification
    Typical Components 0603 – 1210
    Tape Width 8 mm
    Tape depth (feeder type) 2.5 mm (8 mm)
    Tape Material Embossed and Paper Tapes
    Full Reels and Cut Tape Yes
    Package Weight 3 lbs
    Dimensions 14 x 12 x 6 in

     

    Works With Juki  Model CF081ER Feeders
    8 Feeder Fingers per kit

  • Juki CF081E Feeder Finger

    Juki CF081E Feeder Finger (Case of 8)

    For Juki CF081E Feeders

    8 Feeder Fingers per kit

     

     

    The CF Feeder Fingers add a new dimension to Juki mechanical feeders.

     

    Installing the Feeder Finger provides cut tape relief for tape as short as 1.5″ / 38.2mm without attaching a cover tape leader. Removing the cover tape collection process eliminates feeder jams and machine stops during production. Terminating the mechanical mechanisms for collecting the cover tape reduces feeder maintenance.

     

     

     

    Key benefits:

    • Attaches easily to your existing feeder
    • Handles cut tape as short as 1.5″ /38.2mm
    • Eliminates splicing
    • Loads in less than 5 seconds
    • Eliminates cover tape jams
    • Reduces setup time by eighty-percent
    Cut Tape Feeder Finger Specification
    Typical Components 0603 – 1210
    Tape Width 8 mm
    Tape depth (feeder type) 2.5 mm (8 mm)
    Tape Material Paper Tape Only
    Full Reels or Cut Tape Yes
    Package Weight 1 lbs
    Dimensions 14 x 12 x 6 in

     

    For Juki CF081E and Feeders
    8 Feeder Fingers per kit

  • $75.00 S&H

    Tape Dent Tool

    The Tape Dent Tool is used to prep the component tape after cutting the tape thru the sprocket hole and before inserting it into the Feeder Finger. The moon shaped dent allows the blade to easily penetrate and separate the cover tape from the paper tape.

  • Panasonic CM Feeder Finger

    Panasonic CM Feeder Finger (Case of 8)

    For Panasonic CM Feeders

     

    The Panasonic CM Leaderles Feeder Finger is designed to work with feeders compatible with Panasonic’s CM series pick and place machines.

     

    When used with the Panasonic 8mm dual-track feeder, the CM Leaderless Feeder Finger offers unique features and advantages that can increase production capacity by up to 150%. It achieves this by reducing feeder setup and changeover time. The operator can load tape strips as short as 1 inch (25.4mm) or an entire reel by simply pushing the tape into the feeder and placing it onto the pick and place or feeder cart. Unlike before, there is no need for a tape leader; It utilizes a plow blade design to fold and crease the cover tape flat as it travels through the feeder. Additionally, the cover tape collection process is eliminated, which helps reduce feeder jams and significantly lowers feeder maintenance costs.

     

    Key benefits:

    • Attaches easily to your existing feeder
    • Handles tape strips as short as 1″ / 25.4mm
    • Eliminates splicing
    • Loads in less than 5 seconds
    • Eliminates cover tape jams
    • Reduces setup time by eight-percent
    Cut Tape Feeder Finger Specification
    Typical components 0201 / 1210
    Tape Width 8 mm
    Tape depth (feeder type) 2.5 mm (8 mm)
    Tape material Paper and Embossed Tape
    Full Reels or Cut Tape Yes

     

    Package Weight 3 lbs
    Dimensions 14 x 12 x 6 in

    For Panasonic CM Feeders
    8 Feeder Fingers per case

  • Samsung / Hanwha Leaderless Feeder Finger

    Samsung / Hanwha Leaderless Feeder(Case of 8)

    For SME Electric Feeders

    8 Feeder Fingers per kit

     

    The Leaderless Feeder Finger for Samsung/Hanwha SME Feeders is a cutting-edge tool that revolutionizes the tape feeding process for full reels and cut tape strips by eliminating the need for cover tape leaders. This innovative design offers enhanced flexibility over the OEM  tape guide. It features a plow blade that folds and creases the cover tape flat as it passes through the feeder. It can feed shorter tape strips of various lengths packaged in paper or plastic 8mm tape. With its push-and-go functionality, the Feeder Finger significantly reduces setup and changeover time by 80%, making it an essential asset for Hanwha equipment users.

     

     

    Key benefits:

    • Attaches easily to your existing feeder
    • Handles cut tape as short as  1″ / 25.4mm
    • Eliminates splicing
    • Loads in less than 5 seconds
    • Eliminates cover tape jams
    • Reduces setup time by eight-percent
    Cut Tape Feeder Finger Specification
    Typical Components 0201 / 1210
    Tape Width 8 mm
    Tape depth (feeder type) 2.5 mm (8 mm)
    Tape Material Paper and Embossed  Tapes
    Full Reels or Cut Tape Yes
    Weight 3 lbs
    Dimensions 14 x 12 x 6 in
  • Yamaha YS Feeder Finger

    Yamaha SS / YS / ZS Leaderless Feeder (Case of 10)

    For Yamaha SS / YS & ZS Feeders

    10 Feeder Fingers per Kit

     

    The YS / SS and ZS Feeder Fingers are precision machined tape guides that convert your Yamaha feeders to Leaderless feeders. The Leaderless feeder uses a plow blade design that detaches and folds the cover tape out of the way of the pick and place, eliminating the need for cover tape routing and collection.

     

    The plow blade design is unique in that it allows the feeding of cut tape down to 1 inch or 25.4mm without attaching a cover tape leader. This means the operator can quickly load the feeder in less than five seconds without losing any components during setup.

     

    The Feeder Finger also reduces feeder setup and changeover time by 80%, making it a highly efficient tool in your manufacturing processes. This tool can be used with paper and embossed tapes, making it versatile and practical for all setups.

     

    The YS / SS and ZS Feeder Fingers are valuable additions to your production process. With precision machining, a plow blade design, and compatibility with paper and embossed tapes, this tool offers high efficiency and versatility while reducing setup and changeover time by 80%.

     

    Key benefits:

    • Attaches easily to your existing feeder
    • Handles cut tape as short as 1″ / 25.4mm
    • Eliminates splicing
    • Loads in less than 5 seconds
    • Eliminates cover tape jams
    • Reduces setup time by eighty-percent
    Cut Tape Feeder Finger Specification
    Typical Components 0201 / 1210
    Tape Width 8 mm
    Tape Depth (feeder type) 2.5 mm (8 mm)
    Tape Material Paper and Embossed Tapes
    Full Reel & Cut Tape Yes

     

    Package Weight 3 lbs
    Dimensions 14 x 12 x 6 in

     

    For Yamaha SS / YS & ZS Feeders
    10 Feeder Fingers per kit   

  • ASM Siplace X Cut Tape Feeder

    ASM Siplace X Feeder Finger (Case of 8)

    For ASM Siplace X Smart Feeders

     

    The ASM Siplace Feeder Finger is designed to work with the new Siplace Smart Feeder.

    The Feeder Finger, coupled with the Siplace Smart Feeder, adds key features and benefits that improve machine utilization and throughput. An unskilled operator can load tape strips as short as 3 inches or a full reel by merely pushing the tape into the feeder and placing it onto the pick and place or feeder cart. A tape leader is no longer required, and the feeder can be loaded in 5 seconds. Eliminating the cover tape collection process eliminates feeder jams during production improving machine utilization and throughput.

     

    Key benefits:

    • Attaches easily to your existing feeder
    • Handles tape strips as short as 3″ / 76.2mm
    • Eliminates splicing
    • Loads in less than 5 seconds
    • Eliminates cover tape jams
    • Reduces setup time by fifty-percent
    Cut Tape Feeder Finger Specification
    Typical components 0201 / 1206
    Tape Width 8 mm
    Tape depth (feeder type) 2.5 mm (8 mm)
    Tape material Paper Tape only
    Full Reels or Cut Tape Yes

     

    Package Weight 3 lbs
    Dimensions 14 x 12 x 6 in

    For ASM Siplace X Feeders
    8 Feeder Fingers per case

  • Samsung SM Feeder Finger (Case of 8)

    For Samsung SM Pneumatic Feeders

    8 Feeder Fingers per case

     

    The SM Feeder Finger is designed to work with the Samsung SM Pneumatic Feeder to improve feeder efficiency and significantly reduce production setup and change over time. The key features and benefits allow the operator to load tape strips as short as 3″ / 76.2mm or the full reel in 5 seconds with zero component loss. Eliminating the cover tape collection process eliminates feeder jams during production improving machine utilization and throughput.

     

     

    Key benefits:

    • Attaches easily to your existing feeder
    • Handles cut-tape as short as 3″ / 76.2mm
    • Eliminates splicing
    • Loads in less than 5 seconds
    • Eliminates cover tape jams
    • Reduces setup time by fifty-percent
    Cut Tape Feeder Finger Specification
    Typical components 0603 / 1206
    Tape Width 8 mm
    Tape depth (feeder type) 2.5 mm (8 mm)
    Tape material Paper Tape only
    Full Reels or Cut Tape Yes
    Package Weight 3 lbs
    Dimensions 14 x 12 x 6 in

     

    For Samsung SM Feeders
    8 Feeder Fingers per case

  • Juki AF Feeder Finger

    Juki AF081E Feeder Finger (Case of 8)

    Works With Juki AF081E Feeders

    8 Feeder Fingers per case

     

    Transform your Juki AF081ER feeders into leaderless feeders quickly and easily with the Juki Leaderless Feeder Finger. This innovative accessory feeds component tapes without needing a cover tape leader. Say goodbye to the hassle of manually removing cover tape leaders and enjoy a more efficient and streamlined production process with the Juki Leaderless Feeder Finger.

     

    The AF feeder is Juki’s spliceable feeder. Installing the Feeder Finger removes the cover tape tension issues associated with this feeder while providing a solution for feeding short strips of paper tape without attaching a cover tape leader. Eliminating the cover tape collection process eliminates feeder jams during production, improving machine utilization and throughput. Eliminating the cover tape collection mechanism reduces feeder maintenance.

     

    Key benefits:

    • Attaches easily to your existing feeder
    • Handles tape strips as short as 3″ /76.2mm
    • Eliminates splicing
    • Loads in less than 5 seconds
    • Eliminates cover tape jams
    • Reduces setup time by eight-percent
    Cut Tape Feeder Finger
    Typical components 0603 – 1206
    Tape Width 8 mm
    Tape depth (feeder type) 2.5 mm (8 mm)
    Tape material Paper Tape only
    Full Reels or Cut Tape Yes
    Package Weight 3 lbs
    Dimensions 14 x 12 x 6 in

     

    Works with Juki Model AF081E, AF05HP and AQ02HP Feeders
    8 Feeder Fingers per case

  • Europlacer Leaderless Feeder

    Europlacer Leaderless Feeder

    For Europlace ii-A1 and ii-A2 and iineo+ machines

     

    The Europlacer Leaderless Feeder is a highly efficient and user-friendly tool simplifying feeding component tape. Its innovative plow blade design allows feeding cut tape as short as 1.5″/38.1mm without attaching a cover tape leader. This feature helps to reduce wastage and save valuable time during the feeder setup process.

     

    Using the Europlacer Leaderless Feeder is also incredibly easy. All you need to do is push the tape into the Leaderless Feeder and place the feeder onto the Cart. The first component is then ready to be picked, making it a highly efficient tool for your assembly line.

     

    What’s more, the blowblade design of the Europlacer Leaderless Feeder makes tape loading a breeze, further streamlining the assembly process. This design also eliminates the need for cover tape collection, which adds user convenience.

     

    Overall, the Europlacer Leaderless Feeder is an indispensable tool. Its ease of use, efficiency, and time-saving features make it a must-have for your assembly line.

     

     

    Key benefits:

    • Design to function with the iifeeder Cart
    • Handles cut tape as short as 1.5″ / 38.1mm
    • Eliminates splicing
    • Loads in less than 5 seconds
    • Eliminates cover tape issues
    • Reduces feeder setup time by eighty-percent
    Cut Tape Feeder Finger Specification
    Typical components 0201 / 1210
    Tape Width 8 mm
    Tape depth (feeder type) 2.5 mm (8 mm)
    Tape material Paper and Embossed Tapes
    Full Reel or Cut Tape Yes, Cut Tape Length 1.5″ /38.1mm
    Package Weight 1 lb
    Dimensions 14 x 12 x 6 in

     

     

    For Europlacer ii-A1 and ii-A2 and iineo+ machines

  • Yamaha YS Feeder Finger

    IPulse F3 Leaderless Feeder Finger (Case of 10)

    For I-Pulse F3 Feeders

    10 Feeder Fingers per case

     

    The F3 Leaderless Feeder Finger eliminates the need for cover tape leaders when feeding entire reels and cut tape strips. It utilizes a plow blade design to fold and crease the cover tape flat as it travels through the feeder. The F3 Leaderless feeder provides enhanced flexibility compared to the original equipment. It can handle shorter tape strips of varying lengths, going as short as one inch, for chips packaged in paper or embossed 8mm tape. Its push-and-go solution reduces the feeder setup time by 80%, making it an essential tool for Yamaha’s customers.

     

     

    Key benefits:

    • Attaches easily to your existing feeder
    • Handles cut-tape as short as 3″ / 76.2mm
    • Eliminates splicing
    • Loads in less than 5 seconds
    • Eliminates cover tape jams
    • Reduces setup time by fifty-percent
    Cut Tape Feeder Finger Specification
    Typical components 0201 / 1210
    Tape Width 8 mm
    Tape depth (feeder type) 2.5 mm (8 mm)
    Tape material Paper and Embossed Tape
    Full Reels or Cut Tape Yes

     

    Package Weight 3 lbs
    Dimensions 14 x 12 x 6 in

     

    For I-Pulse F3 Feeders
    10 Feeder Fingers per case