fbpx
  • Samsung SM 2MM Pitch Feeder Finger (Case of 8)

    For Samsung SM 2MM Pitch Feeders

    8 Feeder Fingers per case

     

    The SM 0402 Feeder Finger is designed to work with the Samsung 2mm Pitch Pneumatic Feeders to improve feeder efficiency and significantly reduce feeder setup and change over time. The key features and benefits allow the operator to load tape strips as short as three inches or the full reel in 5 seconds with zero component loss. Eliminating the cover tape collection process eliminates feeder jams during production improving machine utilization and throughput.

     

     

    Key benefits:

    • Attaches easily to your existing feeder
    • Handles cut-tape as short as 3″ / 76.2mm
    • Eliminates splicing
    • Loads in less than 5 seconds
    • Eliminates cover tape jams
    • Reduces setup time by fifty-percent
    Cut Tape Feeder Finger Specification
    Typical components 0201 / 0402
    Tape Width 8 mm
    Tape depth (feeder type) 2.5 mm (8 mm)
    Tape material Paper only
    Full Reels or Cut Tape Yes
    Package Weight  3 lbs
    Dimensions 14 x 12 x 6 in

    For Samsung SM 2MM Pitch Feeders
    8 Feeder Fingers per case

  • Yamaha YS Feeder Finger

    IPulse F3 Leaderless Feeder Finger (Case of 10)

    For I-Pulse F3 Feeders

    10 Feeder Fingers per case

     

    The F3 Leaderless Feeder Finger eliminates the need for cover tape leaders when feeding entire reels and cut tape strips. It utilizes a plow blade design to fold and crease the cover tape flat as it travels through the feeder. The F3 Leaderless feeder provides enhanced flexibility compared to the original equipment. It can handle shorter tape strips of varying lengths, going as short as one inch, for chips packaged in paper or embossed 8mm tape. Its push-and-go solution reduces the feeder setup time by 80%, making it an essential tool for Yamaha’s customers.

     

     

    Key benefits:

    • Attaches easily to your existing feeder
    • Handles cut-tape as short as 3″ / 76.2mm
    • Eliminates splicing
    • Loads in less than 5 seconds
    • Eliminates cover tape jams
    • Reduces setup time by fifty-percent
    Cut Tape Feeder Finger Specification
    Typical components 0201 / 1210
    Tape Width 8 mm
    Tape depth (feeder type) 2.5 mm (8 mm)
    Tape material Paper and Embossed Tape
    Full Reels or Cut Tape Yes

     

    Package Weight 3 lbs
    Dimensions 14 x 12 x 6 in

     

    For I-Pulse F3 Feeders
    10 Feeder Fingers per case

  • Europlacer Leaderless Feeder

    Europlacer Leaderless Feeder

    For Europlace ii-A1 and ii-A2 and iineo+ machines

     

    The Europlacer Leaderless Feeder is a highly efficient and user-friendly tool simplifying feeding component tape. Its innovative plow blade design allows feeding cut tape as short as 1.5″/38.1mm without attaching a cover tape leader. This feature helps to reduce wastage and save valuable time during the feeder setup process.

     

    Using the Europlacer Leaderless Feeder is also incredibly easy. All you need to do is push the tape into the Leaderless Feeder and place the feeder onto the Cart. The first component is then ready to be picked, making it a highly efficient tool for your assembly line.

     

    What’s more, the blowblade design of the Europlacer Leaderless Feeder makes tape loading a breeze, further streamlining the assembly process. This design also eliminates the need for cover tape collection, which adds user convenience.

     

    Overall, the Europlacer Leaderless Feeder is an indispensable tool. Its ease of use, efficiency, and time-saving features make it a must-have for your assembly line.

     

     

    Key benefits:

    • Design to function with the iifeeder Cart
    • Handles cut tape as short as 1.5″ / 38.1mm
    • Eliminates splicing
    • Loads in less than 5 seconds
    • Eliminates cover tape issues
    • Reduces feeder setup time by eighty-percent
    Cut Tape Feeder Finger Specification
    Typical components 0201 / 1210
    Tape Width 8 mm
    Tape depth (feeder type) 2.5 mm (8 mm)
    Tape material Paper and Embossed Tapes
    Full Reel or Cut Tape Yes, Cut Tape Length 1.5″ /38.1mm
    Package Weight 1 lb
    Dimensions 14 x 12 x 6 in

     

     

    For Europlacer ii-A1 and ii-A2 and iineo+ machines

  • Juki AF Feeder Finger

    Juki AF081E Feeder Finger (Case of 8)

    Works With Juki AF081E Feeders

    8 Feeder Fingers per case

     

    Transform your Juki AF081ER feeders into leaderless feeders quickly and easily with the Juki Leaderless Feeder Finger. This innovative accessory feeds component tapes without needing a cover tape leader. Say goodbye to the hassle of manually removing cover tape leaders and enjoy a more efficient and streamlined production process with the Juki Leaderless Feeder Finger.

     

    The AF feeder is Juki’s spliceable feeder. Installing the Feeder Finger removes the cover tape tension issues associated with this feeder while providing a solution for feeding short strips of paper tape without attaching a cover tape leader. Eliminating the cover tape collection process eliminates feeder jams during production, improving machine utilization and throughput. Eliminating the cover tape collection mechanism reduces feeder maintenance.

     

    Key benefits:

    • Attaches easily to your existing feeder
    • Handles tape strips as short as 3″ /76.2mm
    • Eliminates splicing
    • Loads in less than 5 seconds
    • Eliminates cover tape jams
    • Reduces setup time by eight-percent
    Cut Tape Feeder Finger
    Typical components 0603 – 1206
    Tape Width 8 mm
    Tape depth (feeder type) 2.5 mm (8 mm)
    Tape material Paper Tape only
    Full Reels or Cut Tape Yes
    Package Weight 3 lbs
    Dimensions 14 x 12 x 6 in

     

    Works with Juki Model AF081E, AF05HP and AQ02HP Feeders
    8 Feeder Fingers per case

  • Samsung SM Feeder Finger (Case of 8)

    For Samsung SM Pneumatic Feeders

    8 Feeder Fingers per case

     

    The SM Feeder Finger is designed to work with the Samsung SM Pneumatic Feeder to improve feeder efficiency and significantly reduce production setup and change over time. The key features and benefits allow the operator to load tape strips as short as 3″ / 76.2mm or the full reel in 5 seconds with zero component loss. Eliminating the cover tape collection process eliminates feeder jams during production improving machine utilization and throughput.

     

     

    Key benefits:

    • Attaches easily to your existing feeder
    • Handles cut-tape as short as 3″ / 76.2mm
    • Eliminates splicing
    • Loads in less than 5 seconds
    • Eliminates cover tape jams
    • Reduces setup time by fifty-percent
    Cut Tape Feeder Finger Specification
    Typical components 0603 / 1206
    Tape Width 8 mm
    Tape depth (feeder type) 2.5 mm (8 mm)
    Tape material Paper Tape only
    Full Reels or Cut Tape Yes
    Package Weight 3 lbs
    Dimensions 14 x 12 x 6 in

     

    For Samsung SM Feeders
    8 Feeder Fingers per case

  • ASM Siplace X Cut Tape Feeder

    ASM Siplace X Feeder Finger (Case of 8)

    For ASM Siplace X Smart Feeders

     

    The ASM Siplace Feeder Finger is designed to work with the new Siplace Smart Feeder.

    The Feeder Finger, coupled with the Siplace Smart Feeder, adds key features and benefits that improve machine utilization and throughput. An unskilled operator can load tape strips as short as 3 inches or a full reel by merely pushing the tape into the feeder and placing it onto the pick and place or feeder cart. A tape leader is no longer required, and the feeder can be loaded in 5 seconds. Eliminating the cover tape collection process eliminates feeder jams during production improving machine utilization and throughput.

     

    Key benefits:

    • Attaches easily to your existing feeder
    • Handles tape strips as short as 3″ / 76.2mm
    • Eliminates splicing
    • Loads in less than 5 seconds
    • Eliminates cover tape jams
    • Reduces setup time by fifty-percent
    Cut Tape Feeder Finger Specification
    Typical components 0201 / 1206
    Tape Width 8 mm
    Tape depth (feeder type) 2.5 mm (8 mm)
    Tape material Paper Tape only
    Full Reels or Cut Tape Yes

     

    Package Weight 3 lbs
    Dimensions 14 x 12 x 6 in

    For ASM Siplace X Feeders
    8 Feeder Fingers per case

  • Yamaha YS Feeder Finger

    Yamaha SS / YS / ZS Leaderless Feeder (Case of 10)

    For Yamaha SS / YS & ZS Feeders

    10 Feeder Fingers per Kit

     

    The YS / SS and ZS Feeder Fingers are precision machined tape guides that convert your Yamaha feeders to Leaderless feeders. The Leaderless feeder uses a plow blade design that detaches and folds the cover tape out of the way of the pick and place, eliminating the need for cover tape routing and collection.

     

    The plow blade design is unique in that it allows the feeding of cut tape down to 1 inch or 25.4mm without attaching a cover tape leader. This means the operator can quickly load the feeder in less than five seconds without losing any components during setup.

     

    The Feeder Finger also reduces feeder setup and changeover time by 80%, making it a highly efficient tool in your manufacturing processes. This tool can be used with paper and embossed tapes, making it versatile and practical for all setups.

     

    The YS / SS and ZS Feeder Fingers are valuable additions to your production process. With precision machining, a plow blade design, and compatibility with paper and embossed tapes, this tool offers high efficiency and versatility while reducing setup and changeover time by 80%.

     

    Key benefits:

    • Attaches easily to your existing feeder
    • Handles cut tape as short as 1″ / 25.4mm
    • Eliminates splicing
    • Loads in less than 5 seconds
    • Eliminates cover tape jams
    • Reduces setup time by eighty-percent
    Cut Tape Feeder Finger Specification
    Typical Components 0201 / 1210
    Tape Width 8 mm
    Tape Depth (feeder type) 2.5 mm (8 mm)
    Tape Material Paper and Embossed Tapes
    Full Reel & Cut Tape Yes

     

    Package Weight 3 lbs
    Dimensions 14 x 12 x 6 in

     

    For Yamaha SS / YS & ZS Feeders
    10 Feeder Fingers per kit   

  • Samsung / Hanwha Leaderless Feeder Finger

    Samsung / Hanwha Leaderless Feeder(Case of 8)

    For SME Electric Feeders

    8 Feeder Fingers per kit

     

    The Leaderless Feeder Finger for Samsung/Hanwha SME Feeders is a cutting-edge tool that revolutionizes the tape feeding process for full reels and cut tape strips by eliminating the need for cover tape leaders. This innovative design offers enhanced flexibility over the OEM  tape guide. It features a plow blade that folds and creases the cover tape flat as it passes through the feeder. It can feed shorter tape strips of various lengths packaged in paper or plastic 8mm tape. With its push-and-go functionality, the Feeder Finger significantly reduces setup and changeover time by 80%, making it an essential asset for Hanwha equipment users.

     

     

    Key benefits:

    • Attaches easily to your existing feeder
    • Handles cut tape as short as  1″ / 25.4mm
    • Eliminates splicing
    • Loads in less than 5 seconds
    • Eliminates cover tape jams
    • Reduces setup time by eight-percent
    Cut Tape Feeder Finger Specification
    Typical Components 0201 / 1210
    Tape Width 8 mm
    Tape depth (feeder type) 2.5 mm (8 mm)
    Tape Material Paper and Embossed  Tapes
    Full Reels or Cut Tape Yes
    Weight 3 lbs
    Dimensions 14 x 12 x 6 in
  • Panasonic Leaderless Feeder Finger

    Panasonic CM Feeder Finger (Case of 8)

    For Panasonic CM Feeders

     

    The Panasonic CM Leaderles Feeder Finger is designed to work with feeders compatible with Panasonic’s CM series pick and place machines.

     

    When used with the Panasonic 8mm dual-track feeder, the CM Leaderless Feeder Finger offers unique features and advantages that can increase production capacity by up to 150%. It achieves this by reducing feeder setup and changeover time. The operator can load tape strips as short as 1 inch (25.4mm) or an entire reel by simply pushing the tape into the feeder and placing it onto the pick and place or feeder cart. Unlike before, there is no need for a tape leader; It utilizes a plow blade design to fold and crease the cover tape flat as it travels through the feeder. Additionally, the cover tape collection process is eliminated, which helps reduce feeder jams and significantly lowers feeder maintenance costs.

     

    Key benefits:

    • Attaches easily to your existing feeder
    • Handles tape strips as short as 1″ / 25.4mm
    • Eliminates splicing
    • Loads in less than 5 seconds
    • Eliminates cover tape jams
    • Reduces setup time by eight-percent
    Cut Tape Feeder Finger Specification
    Typical components 0201 / 1210
    Tape Width 8 mm
    Tape depth (feeder type) 2.5 mm (8 mm)
    Tape material Paper and Embossed Tape
    Full Reels or Cut Tape Yes

     

    Package Weight 3 lbs
    Dimensions 14 x 12 x 6 in

    For Panasonic CM Feeders
    8 Feeder Fingers per case