-
Juki AF05FF Feeder Finger (Case of 8)
For Juki AF05HP Feeders
8 Feeder Fingers per case
The AF Feeder Finger was designed in conjunction with Juki Automation Systems to work with the AF05HP 2mm pitch mechanical feeder (green handle)
The AF feeder is Juki’s spliceable feeder, installing the Feeder Finger eliminates the cover tape tension problems associated with this feeder. The patented features and benefits of the Feeder Finger design allows the operator to load tape strips as short as three inches or a full reel without a leader. Removing the cover tape collection process eliminates feeder jams and enhances machine utilization and throughput. Feeder maintenance is also reduced by removing the cover tape collection mechanism.
If the AF feeder is utilized in your facility waiting for a job requiring a spliceable feeder, install the AF Feeder Finger and place the feeder into everyday use.
Key benefits:
- Attaches easily to your existing feeder
- Handles cut-tape as short as 3″ /76.2mm
- Eliminates splicing
- Loads in less than 5 seconds
- Eliminates cover tape jams
- Reduces setup time by fifty-percent
Cut Tape Feeder Finger Specification Typical components 0201 / 0402 Tape Width 8 mm Tape depth (feeder type) 2.5 mm (8 mm) Tape material Paper Tape only Full Reels or Cut Tape Yes Package Weight 7 lbs Dimensions 14 x 12 x 6 in -
Essemtec Feeder Finger (Case of 8)
The Essemtec Feeder Finger Solution is in Development.
Weight 7 lbs Dimensions 14 x 12 x 6 in -
ASM Siplace X Feeder Finger (Case of 8)
For ASM Siplace X Smart Feeders
The ASM Siplace Feeder Finger is designed to work with the new Siplace Smart Feeder.
The Feeder Finger, coupled with the Siplace Smart Feeder, adds key features and benefits that improve machine utilization and throughput. An unskilled operator can load tape strips as short as 3 inches or a full reel by merely pushing the tape into the feeder and placing it onto the pick and place or feeder cart. A tape leader is no longer required, and the feeder can be loaded in 5 seconds. Eliminating the cover tape collection process eliminates feeder jams during production improving machine utilization and throughput.
Key benefits:
- Attaches easily to your existing feeder
- Handles tape strips as short as 3″ / 76.2mm
- Eliminates splicing
- Loads in less than 5 seconds
- Eliminates cover tape jams
- Reduces setup time by fifty-percent
Cut Tape Feeder Finger Specification Typical components 0201 / 1206 Tape Width 8 mm Tape depth (feeder type) 2.5 mm (8 mm) Tape material Paper Tape only Full Reels or Cut Tape Yes Package Weight 3 lbs Dimensions 14 x 12 x 6 in -
$18.00 S&HTape Push Tool
The Tape Push Tool is used to advance the component tape onto the sprocket wheel. This tool is recommended for use with all tapes and one is included in each Feeder Finger kit.
-
$75.00 S&HTape Dent Tool
The Tape Dent Tool is used to prep the component tape after cutting the tape thru the sprocket hole and before inserting it into the Feeder Finger. The moon shaped dent allows the blade to easily penetrate and separate the cover tape from the paper tape.
-
$200.00 S&HSamsung SM 2MM Pitch Feeder Finger (Case of 8)
For Samsung SM 2MM Pitch Feeders
8 Feeder Fingers per case
The SM 0402 Feeder Finger is designed to work with the Samsung 2mm Pitch Pneumatic Feeders to improve feeder efficiency and significantly reduce feeder setup and change over time. The key features and benefits allow the operator to load tape strips as short as three inches or the full reel in 5 seconds with zero component loss. Eliminating the cover tape collection process eliminates feeder jams during production improving machine utilization and throughput.
Key benefits:
- Attaches easily to your existing feeder
- Handles cut-tape as short as 3″ / 76.2mm
- Eliminates splicing
- Loads in less than 5 seconds
- Eliminates cover tape jams
- Reduces setup time by fifty-percent
Cut Tape Feeder Finger Specification Typical components 0201 / 0402 Tape Width 8 mm Tape depth (feeder type) 2.5 mm (8 mm) Tape material Paper only Full Reels or Cut Tape Yes 
SM Feeder Finger Install and Use Guide 338.02 KBPackage Weight 3 lbs Dimensions 14 x 12 x 6 in -
$200.00 S&HIPulse F3 Feeder Finger (Case of 10)
For I-Pulse F3 Feeders
10 Feeder Fingers per case
The F3 Feeder Finger is designed to work with the iPulse F3 Electronic Feeders to improve feeder efficiency and significantly reduce production setup and change over time. The Feeder Finger coupled with the F3 Feeder allows the operator to load tape strips as short as 3 inches or the full reel in 5 seconds with zero component loss. Eliminating the cover tape collection process eliminates feeder jams during production improving machine utilization and throughput.
Key benefits:
- Attaches easily to your existing feeder
- Handles cut-tape as short as 3″ / 76.2mm
- Eliminates splicing
- Loads in less than 5 seconds
- Eliminates cover tape jams
- Reduces setup time by fifty-percent
Cut Tape Feeder Finger Specification Typical components 0201 / 1206 Tape Width 8 mm Tape depth (feeder type) 2.5 mm (8 mm) Tape material Paper Tape & Heat Sealed Plastic Tape Full Reels or Cut Tape Yes IPulse F3 Feeder Finger Install and Use Guide 233.74 KBPackage Weight 3 lbs Dimensions 14 x 12 x 6 in -
$200.00 S&HSamsung CP Feeder Finger (Case of 8)
For Samsung CP Feeders
8 Feeder Fingers per case
The CP Cut Tape Feeder Finger Solution is designed to work with Samsung’s legacy CP Feeders to make feeding component tape easier than ever. Merely push the tape into the Feeder Finger and index the feeder one time. The first component is ready to be picked. No tape leader is required, and the cover tape collection process is eliminated entirely. By simplifying the feeder loading and unloading process, feeder setup and changeover times are significantly reduced.
At the end of the day, this means significantly higher productivity.
Key benefits:
- Attaches easily to your existing feeder
- Handles cut tape as short as three inches
- Eliminates splicing
- Loads in less than 5 seconds
- Eliminates cover tape jams
- Reduces setup time by fifty-percent
Cut Tape Feeder Finger Specification Typical components 0402 / 1206 Tape Width 8 mm Tape depth (feeder type) 2.5 mm (8 mm) Tape material Paper Tape only Full Reel or Cut Tape Yes CP Feeder Finger Install and Use Guide 147.38 KBPackage Weight 7 lbs Dimensions 14 x 12 x 6 in -
$200.00 S&HJuki AF08FF Feeder Finger (Case of 8)
Works With Juki AF081E, AF05HP and AQ02HP Feeders
8 Feeder Fingers per case
The AF08 Feeder Finger was designed in conjunction with Juki Automation Systems to work with the AF081E mechanical feeder (blue handle) and the AF05HP & AQ02HP 2mm pitch feeders. The AF feeder is Juki’s spliceable feeder, installing the Feeder Finger eliminates the cover tape tension problems associated with this feeder. The key features and benefits allow the operator to load tape strips as short as three inches without attaching a leader. Eliminating the cover tape collection process eliminates feeder jams during production improving machine utilization and throughput. Feeder maintenance is significantly reduced by eliminating the cover tape collection mechanism.
If the AF feeder is utilized in your facility waiting for a job requiring a spliceable feeder install the Feeder Finger and place the feeder into everyday use.
Key benefits:
- Attaches easily to your existing feeder
- Handles tape strips as short as 3″ /76.2mm
- Eliminates splicing
- Loads in less than 5 seconds
- Eliminates cover tape jams
- Reduces setup time by fifty-percent
Cut Tape Feeder Finger Typical components 0201 – 1206 Tape Width 8 mm Tape depth (feeder type) 2.5 mm (8 mm) Tape material Paper Tape only Full Reels or Cut Tape Yes Juki AF08 Feeder Finger Installation and User Guide 434.47 KBPackage Weight 3 lbs Dimensions 14 x 12 x 6 in