-
Samsung SM 2MM Pitch Feeder Finger (Case of 8)
For Samsung SM 2MM Pitch Feeders
8 Feeder Fingers per case
The SM 0402 Feeder Finger is designed to work with the Samsung 2mm Pitch Pneumatic Feeders to improve feeder efficiency and significantly reduce feeder setup and change over time. The key features and benefits allow the operator to load tape strips as short as three inches or the full reel in 5 seconds with zero component loss. Eliminating the cover tape collection process eliminates feeder jams during production improving machine utilization and throughput.
Key benefits:
- Attaches easily to your existing feeder
- Handles cut-tape as short as 3″ / 76.2mm
- Eliminates splicing
- Loads in less than 5 seconds
- Eliminates cover tape jams
- Reduces setup time by fifty-percent
Cut Tape Feeder Finger Specification Typical components 0201 / 0402 Tape Width 8 mm Tape depth (feeder type) 2.5 mm (8 mm) Tape material Paper only Full Reels or Cut Tape Yes Package Weight 3 lbs Dimensions 14 x 12 x 6 in -
Panasonic CM Feeder Finger (Case of 8)
For Panasonic CM Feeders
The Panasonic CM Feeder Finger is designed to work with feeders compatible with Panasonic’s CM series pick and place machines.
The CM Feeder Finger, coupled with the Panasonic 8mm dual-track feeder adds patented features and benefits that increase production capacity by 150% by reducing feeder setup and change over time. The operator can load tape strips as short as 3″ / 76.2mm or a full reel by merely pushing the tape into the feeder and placing it onto the pick and place or feeder cart. A tape leader is no longer required, and the feeder can be loaded in less than 5 seconds. Removing the cover tape collection process eliminates feeder jams and significantly reduces feeder maintenance costs.
Key benefits:
- Attaches easily to your existing feeder
- Handles tape strips as short as 3″ / 76.2mm
- Eliminates splicing
- Loads in less than 5 seconds
- Eliminates cover tape jams
- Reduces setup time by fifty-percent
Cut Tape Feeder Finger Specification Typical components 0402 / 1206 Tape Width 8 mm Tape depth (feeder type) 2.5 mm (8 mm) Tape material Paper Tape only Full Reels or Cut Tape Yes Package Weight 3 lbs Dimensions 14 x 12 x 6 in -
Yamaha SS / YS / ZS Feeder Finger (Case of 10)
For Yamaha SS / YS & ZS Feeders
10 Feeder Fingers per kit
The YS / SS and ZS Feeder Fingers are precision machined tape guides designed to replace the original guide on Yamaha feeders. The fingers use a plow blade to detach and fold the cover tape out of the way of the pick and place, eliminating the cover tape routing and collection process. The plow blade design allows feeding of cut tape down to 1″ / 25.4mm without attaching a cover tape leader. The operator can load the feeder in less than five seconds without component loss at setup. The Feeder Finger reduces feeder setup and changeover time by 80%. The new release works with both paper and embossed tapes. See specification
Key benefits:
- Attaches easily to your existing feeder
- Handles cut tape as short as 1″ / 25.4mm
- Eliminates splicing
- Loads in less than 5 seconds
- Eliminates cover tape jams
- Reduces setup time by eighty-percent
Cut Tape Feeder Finger Specification Typical Components 0201 / 1206 Tape Width 8 mm Tape Depth (feeder type) 2.5 mm (8 mm) Tape Material Paper and Embossed Tapes Full Reel & Cut Tape Yes Package Weight 3 lbs Dimensions 14 x 12 x 6 in -
Samsung / Hanwha SME Feeder Finger (Case of 8)
For SME Electric Feeders
8 Feeder Fingers per kit
The SME Feeder Finger is designed to work with the SME Electric Feeder to improve feeder efficiency and significantly reduce production setup and change over time. The key features and benefits allow the operator to load tape strips as short as 3″ / 76.5mm or the full reel in 5 seconds with no component loss at feeder setup. Eliminating the cover tape collection process eliminates feeder jams during production improving machine utilization and throughput.
Key benefits:
- Attaches easily to your existing feeder
- Handles cut tape as short as 3″ / 76.5mm
- Eliminates splicing
- Loads in less than 5 seconds
- Eliminates cover tape jams
- Reduces setup time by fifty-percent
Cut Tape Feeder Finger Specification Typical Components 0201 / 1206 Tape Width 8 mm Tape depth (feeder type) 2.5 mm (8 mm) Tape Material Paper and Embossed Tapes Full Reels or Cut Tape Yes Weight 3 lbs Dimensions 14 x 12 x 6 in -
Samsung SM Feeder Finger (Case of 8)
For Samsung SM Pneumatic Feeders
8 Feeder Fingers per case
The SM Feeder Finger is designed to work with the Samsung SM Pneumatic Feeder to improve feeder efficiency and significantly reduce production setup and change over time. The key features and benefits allow the operator to load tape strips as short as 3″ / 76.2mm or the full reel in 5 seconds with zero component loss. Eliminating the cover tape collection process eliminates feeder jams during production improving machine utilization and throughput.
Key benefits:
- Attaches easily to your existing feeder
- Handles cut-tape as short as 3″ / 76.2mm
- Eliminates splicing
- Loads in less than 5 seconds
- Eliminates cover tape jams
- Reduces setup time by fifty-percent
Cut Tape Feeder Finger Specification Typical components 0603 / 1206 Tape Width 8 mm Tape depth (feeder type) 2.5 mm (8 mm) Tape material Paper Tape only Full Reels or Cut Tape Yes Package Weight 3 lbs Dimensions 14 x 12 x 6 in -
Juki CF081ER Feeder Finger(Case of 8)
Works with Juki CF081ER Feeders
8 Feeder Fingers per kit
The Juki Feeder Fingers are precision machined tape guides designed to replace the original guide on Juki feeders. The finger uses a plow blade to detach and fold the cover tape out of the way of the pick and place, eliminating the cover tape routing and collection process. The plow blade design allows feeding of cut tape down to 1″ / 25.4mm. The operator can load the feeder in less than five seconds without component loss at setup. The Feeder Finger reduces feeder setup and changer time by 80%. See specification
Key benefits:
- Attaches easily to your existing feeder
- Handles tape strips as short as 1.5″ / 38.1mm
- Eliminates cover tape splicing
- Loads in less than 5 seconds
- Eliminates cover tape jams
- Reduces setup time by eighty-percent
Cut Tape Feeder Finger Specification Typical Components 0603 – 1206 Tape Width 8 mm Tape depth (feeder type) 2.5 mm (8 mm) Tape Material Embossed and Paper Tapes Full Reels and Cut Tape Yes Package Weight 3 lbs Dimensions 14 x 12 x 6 in -
$18.00 S&HTape Push Tool
The Tape Push Tool is used to advance the component tape onto the sprocket wheel. This tool is recommended for use with all tapes and one is included in each Feeder Finger kit.
-
IPulse F3 Feeder Finger (Case of 10)
For I-Pulse F3 Feeders
10 Feeder Fingers per case
The F3 Feeder Finger is designed to work with the iPulse F3 Electronic Feeders. The plow blade design folds and creases the cover tape out of the way of the pick and place and is discarded at the front of the machine with the empty tape. The Feeder Finger coupled with the F3 feeder allows the operator to load tape strips as short as 3″ / 76.5mm or the full reel in less than 5 seconds with no component loss. Eliminating the cover tape collection eliminates feeder jams during production and improves machine utilization and throughput.
Key benefits:
- Attaches easily to your existing feeder
- Handles cut-tape as short as 3″ / 76.2mm
- Eliminates splicing
- Loads in less than 5 seconds
- Eliminates cover tape jams
- Reduces setup time by fifty-percent
Cut Tape Feeder Finger Specification Typical components 0201 / 1206 Tape Width 8 mm Tape depth (feeder type) 2.5 mm (8 mm) Tape material Paper Tape Full Reels or Cut Tape Yes Package Weight 3 lbs Dimensions 14 x 12 x 6 in -
$75.00 S&HTape Dent Tool
The Tape Dent Tool is used to prep the component tape after cutting the tape thru the sprocket hole and before inserting it into the Feeder Finger. The moon shaped dent allows the blade to easily penetrate and separate the cover tape from the paper tape.
