• $18.00 S&H

    Tape Push Tool

    The Tape Push Tool is used to advance the component tape onto the sprocket wheel. This tool is recommended for use with all tapes and one is included in each Feeder Finger kit.

  • Fuji NXT Feeder Finger (Case of 8)

    For Fuji Feeders

     

    The Fuji Feeder Finger design works with OEM feeder models W08C & W08F.

    The Feeder Finger for Fuji is a precision machined tape guide designed to replace the original guide on the NXT feeders. The finger uses a plow blade to detach and fold the cover tape out of the way of the pick and place. The plow blade design allows feeding of cut-tape down to 1″ / 25.4mm without attaching a cover tape leader. Eliminating the cover tape routing and collection process reduces feeder setup time by 80%. The operator can now load the feeder in less than five seconds with no component loss at setup.

     

    Key benefits:

    • Attaches easily to your existing feeder
    • Handles cut-tape as short as 1″ / 25.4mm
    • Eliminates splicing
    • Loads in less than 5 seconds
    • Eliminates cover tape jams
    • Reduces feeder setup time by eighty-percent
    Cut Tape Feeder Finger Specification
    Typical components 0201 / 1206
    Tape Width 8 mm – 8.07mm
    Tape pocket depth (feeder type) 1.4 mm (8 mm)
    Tape material Paper and Embossed Tapes
    Full Reels or Cut Tape Yes / Cut Tape down to 1″ / 25.4mm minimum length

     

    Package Weight 3 lbs
    Dimensions 14 x 12 x 6 in

    For Fuji Feeders
    8 Feeder Fingers per case

  • Juki RF Cut Tape Feeder

    Juki RF08AS Feeder Finger (Case of 10)

    For Juki RF08AS Feeders

    10 Feeder Fingers per case

     

    Using the RF08AS Feeder Finger requires a firmware upgrade from Juki Automation Systems, Inc.

     

    ATS designed the RF08AS Feeder Finger in conjunction with Juki Automation Systems to work with the New RS1 pick and place machine. The Feeder Finger, coupled with the new RF08AS electronic feeder, adds critical features and benefits that improve machine utilization and throughput. An unskilled operator can load tape strips as short as 3” /76.2mm or a full reel without a cover tape leader or tape splicing. The cover tape collection process and cover tape feeder jams are eliminated. The operator merely pushes the component tape into the feeder and places it onto the pick and place or feeder cart improving production setup time by 80%.

     

    Key benefits:

    • Attaches easily to your existing feeder
    • Handles cut-tape as short as 3″ / 76.2mm
    • Eliminates tape splicing
    • Loads in less than 5 seconds
    • Eliminates cover tape jams
    • Reduces setup time by eighty-percent
    Cut Tape Feeder Finger Specification
    Typical components 0201 / 1206
    Tape Width 8 mm
    Tape depth (feeder type) 2.5 mm (8 mm)
    Tape material Paper Tape only
    Full Reels or Cut Tape Yes

     

    Package Weight 3 lbs
    Dimensions 14 x 12 x 6 in

     

    For Juki RF08AS Feeders
    10 Feeder Fingers per case

  • $235.00 S&H

    Juki CF081ER Feeder Finger Paper(Case of 8)

    Works with Juki CF081ER Feeders

    8 Feeder Fingers per case

     

    The Juki Feeder Fingers are precision machined tape guides designed to replace the original guide on Juki feeders. The finger uses a plow blade to detach and fold the cover tape out of the way of the pick and place, eliminating the cover tape routing and collection process. The plow blade design allows feeding of cut-tape down to 1″ / 25.4mm without attaching a cover tape leader. The operator can now load the feeder in less than five seconds with no component loss at setup. The Feeder Finger reduces feeder setup and changer time by 80%. There are two versions of the CF081ER Feeder Finger, and the red finger works with 8mm embossed/plastic tapes. See specification

     

     

    Key benefits:

    • Attaches easily to your existing feeder
    • Handles tape strips as short as 1.5″ / 38.1mm
    • Eliminates cover tape splicing
    • Loads in less than 5 seconds
    • Eliminates cover tape jams
    • Reduces setup time by eighty-percent
    Cut Tape Feeder Finger Specification
    Typical components 0603 – 1206
    Tape Width 8 mm
    Tape depth (feeder type) 2.5 mm (8 mm)
    Tape material Paper Tape
    Full Reels or Cut Tape Yes
    Package Weight 3 lbs
    Dimensions 14 x 12 x 6 in

     

    Works With Juki  Model CF081ER Feeders
    8 Feeder Fingers per case

  • Juki CF081E Feeder Finger

    Juki CF081E Feeder Finger (Case of 8)

    For Juki CF081E and CF05HP Feeders

    8 Feeder Fingers per case

     

     

    ATS designed the CF Feeder Finger in conjunction with Juki Automation Systems to work with the CF081E and CF05HP mechanical feeders

     

    The CF081E and CF05HP feeders are Juki’s earlier version of their mechanical feeder. Installing the Feeder Finger provides a solution for feeding cut tape as short 3″ / 76.2mm without attaching a cover tape leader and eliminating the cover tape collection process. Removing the cover tape collection process eliminates feeder jams and enhances machine utilization and throughput.  Terminating the mechanical mechanisms for collecting the cover tape reduces feeder maintenance.

     

     

     

    Key benefits:

    • Attaches easily to your existing feeder
    • Handles cut-tape as short as 3″ /76.2mm
    • Eliminates splicing
    • Loads in less than 5 seconds
    • Eliminates cover tape jams
    • Reduces setup time by eighty-percent
    Cut Tape Feeder Finger Specification
    Typical components 0201 / 1206
    Tape Width 8 mm
    Tape depth (feeder type) 2.5 mm (8 mm)
    Tape material Paper Tape only
    Full Reels or Cut Tape Yes
    Package Weight 1 lbs
    Dimensions 14 x 12 x 6 in

     

    For Juki CF081E and CF05HP Feeders
    8 Feeder Fingers per case

  • $75.00 S&H

    Tape Dent Tool

    The Tape Dent Tool is used to prep the component tape after cutting the tape thru the sprocket hole and before inserting it into the Feeder Finger. The moon shaped dent allows the blade to easily penetrate and separate the cover tape from the paper tape.

  • Panasonic CM Feeder Finger

    Panasonic CM Feeder Finger (Case of 8)

    For Panasonic CM Feeders

     

    The Panasonic CM Feeder Finger is designed to work with feeders compatible with Panasonic’s CM series pick and place machines.

    The CM Feeder Finger, coupled with the Panasonic 8mm dual-track feeder adds patented features and benefits that increase production capacity by 150% by reducing feeder setup and change over time. The operator can load tape strips as short as 3″ / 76.2mm or a full reel by merely pushing the tape into the feeder and placing it onto the pick and place or feeder cart. A tape leader is no longer required, and the feeder can be loaded in less than 5 seconds. Removing the cover tape collection process eliminates feeder jams and significantly reduces feeder maintenance costs.

     

    Key benefits:

    • Attaches easily to your existing feeder
    • Handles tape strips as short as 3″ / 76.2mm
    • Eliminates splicing
    • Loads in less than 5 seconds
    • Eliminates cover tape jams
    • Reduces setup time by fifty-percent
    Cut Tape Feeder Finger Specification
    Typical components 0402 / 1206
    Tape Width 8 mm
    Tape depth (feeder type) 2.5 mm (8 mm)
    Tape material Paper Tape only
    Full Reels or Cut Tape Yes

     

    Package Weight 3 lbs
    Dimensions 14 x 12 x 6 in

    For Panasonic CM Feeders
    8 Feeder Fingers per case

  • Samsung SME Cut Tape Feeder
    $200.00

    Samsung / Hanwha SME Feeder Finger (Case of 8)

    For SME Electric Feeders

    8 Feeder Fingers per case

     

    The SME Feeder Finger is designed to work with the SME Electric Feeder to improve feeder efficiency and significantly reduce production setup and change over time. The key features and benefits allow the operator to load tape strips as short as  3″ / 76.5mm or the full reel in 5 seconds with no component loss at feeder setup. Eliminating the cover tape collection process eliminates feeder jams during production improving machine utilization and throughput.

     

    Key benefits:

    • Attaches easily to your existing feeder
    • Handles cut-tape as short as  3″ / 76.5mm
    • Eliminates splicing
    • Loads in less than 5 seconds
    • Eliminates cover tape jams
    • Reduces setup time by fifty-percent
    Cut Tape Feeder Finger Specification
    Typical components 0201 / 1206
    Tape Width 8 mm
    Tape depth (feeder type) 2.5 mm (8 mm)
    Tape material Paper Tape only
    Full Reels or Cut Tape Yes
    Weight 3 lbs
    Dimensions 14 x 12 x 6 in
  • Yamaha YS Feeder Finger
    $200.00 S&H

    Yamaha SS / YS / ZS Feeder Finger (Case of 10)

    For Yamaha SS / YS & ZS Feeders

    10 Feeder Fingers per case

     

    The YS / SS and ZS Feeder Fingers attach easily to your existing feeder. The plow blade design folds and creases the cover tape out of the way of the pick and place and is discarded at the front of the machine with the empty tape. Cut tape as shot as 3″ / 76.5mm or full reels can be loaded in less than five seconds with no component loss at feeder setup. Eliminating the cover tape collection eliminates feeder jams during production and improves machine utilization and throughput.

     

    Key benefits:

    • Attaches easily to your existing feeder
    • Handles cut-tape as short as 3″ /76.2mm
    • Eliminates splicing
    • Loads in less than 5 seconds
    • Eliminates cover tape jams
    • Reduces setup time by eighty-percent
    Cut Tape Feeder Finger Specification
    Typical components 0201 / 1206
    Tape Width 8 mm
    Tape depth (feeder type) 2.5 mm (8 mm)
    Tape material Paper Tape
    Full Reel & Cut Tape Yes

     

    Package Weight 3 lbs
    Dimensions 14 x 12 x 6 in

     

    For Yamaha SS / YS & ZS Feeders
    10 Feeder Fingers per case

  • ASM Siplace X Cut Tape Feeder

    ASM Siplace X Feeder Finger (Case of 8)

    For ASM Siplace X Smart Feeders

     

    The ASM Siplace Feeder Finger is designed to work with the new Siplace Smart Feeder.

    The Feeder Finger, coupled with the Siplace Smart Feeder, adds key features and benefits that improve machine utilization and throughput. An unskilled operator can load tape strips as short as 3 inches or a full reel by merely pushing the tape into the feeder and placing it onto the pick and place or feeder cart. A tape leader is no longer required, and the feeder can be loaded in 5 seconds. Eliminating the cover tape collection process eliminates feeder jams during production improving machine utilization and throughput.

     

    Key benefits:

    • Attaches easily to your existing feeder
    • Handles tape strips as short as 3″ / 76.2mm
    • Eliminates splicing
    • Loads in less than 5 seconds
    • Eliminates cover tape jams
    • Reduces setup time by fifty-percent
    Cut Tape Feeder Finger Specification
    Typical components 0201 / 1206
    Tape Width 8 mm
    Tape depth (feeder type) 2.5 mm (8 mm)
    Tape material Paper Tape only
    Full Reels or Cut Tape Yes

     

    Package Weight 3 lbs
    Dimensions 14 x 12 x 6 in

    For ASM Siplace X Feeders
    8 Feeder Fingers per case

  • $200.00 S&H

    Samsung SM Feeder Finger (Case of 8)

    For Samsung SM Pneumatic Feeders

    8 Feeder Fingers per case

     

    The SM Feeder Finger is designed to work with the Samsung SM Pneumatic Feeder to improve feeder efficiency and significantly reduce production setup and change over time. The key features and benefits allow the operator to load tape strips as short as 3″ / 76.2mm or the full reel in 5 seconds with zero component loss. Eliminating the cover tape collection process eliminates feeder jams during production improving machine utilization and throughput.

     

     

    Key benefits:

    • Attaches easily to your existing feeder
    • Handles cut-tape as short as 3″ / 76.2mm
    • Eliminates splicing
    • Loads in less than 5 seconds
    • Eliminates cover tape jams
    • Reduces setup time by fifty-percent
    Cut Tape Feeder Finger Specification
    Typical components 0603 / 1206
    Tape Width 8 mm
    Tape depth (feeder type) 2.5 mm (8 mm)
    Tape material Paper Tape only
    Full Reels or Cut Tape Yes
    Package Weight 3 lbs
    Dimensions 14 x 12 x 6 in

     

    For Samsung SM Feeders
    8 Feeder Fingers per case

  • Juki AF Feeder Finger
    $200.00 S&H

    Juki AF081E Feeder Finger (Case of 8)

    Works With Juki AF081E, AF05HP and AQ02HP Feeders

    8 Feeder Fingers per case

     

    The AF08 Feeder Finger was designed in conjunction with Juki Automation Systems to work with the AF081E mechanical feeder (blue handle) and the AF05HP & AQ02HP 2mm pitch feeders.

     

    The AF feeder is Juki’s spliceable feeder, installing the Feeder Finger removes the cover tape tension issues associated with this feeder while providing a solution for feeding short strips of paper tape without attaching a cover tape leader. Eliminating the cover tape collection process eliminates feeder jams during production improving machine utilization and throughput.  Eliminating the cover tape collection mechanism reduces feeder maintenance.

     

    Key benefits:

    • Attaches easily to your existing feeder
    • Handles tape strips as short as 3″ /76.2mm
    • Eliminates splicing
    • Loads in less than 5 seconds
    • Eliminates cover tape jams
    • Reduces setup time by fifty-percent
    Cut Tape Feeder Finger
    Typical components 0201 – 1206
    Tape Width 8 mm
    Tape depth (feeder type) 2.5 mm (8 mm)
    Tape material Paper Tape only
    Full Reels or Cut Tape Yes
    Package Weight 3 lbs
    Dimensions 14 x 12 x 6 in

     

    Works with Juki Model AF081E, AF05HP and AQ02HP Feeders
    8 Feeder Fingers per case

  • Europlacer Feeder Finger

    For Europlace ii-A1 and ii-A2 and iineo+ machines

     

    The Europlacer Feeder Finger makes feeding component tape easier than ever. The plow blade design allows feeding of cut tape as short as 1.5″/ 38.1mm without attaching a cover tape leader. Merely push the tape into the Feeder Finger and place the feeder onto the Cart. The first component is ready to be picked. The blow blade design simplifies tape loading and eliminates the cover tape collection process.

     

     

    Key benefits:

    • Design to function with the iifeeder Cart
    • Handles cut tape as short as 1.5″ / 38.1mm
    • Eliminates splicing
    • Loads in less than 5 seconds
    • Eliminates cover tape issues
    • Reduces feeder setup time by eighty-percent
    Cut Tape Feeder Finger Specification
    Typical components 0201 / 1206
    Tape Width 8 mm
    Tape depth (feeder type) 2.5 mm (8 mm)
    Tape material Paper and Embossed Tapes
    Full Reel or Cut Tape Yes, Cut Tape Length 1.5″ /38.1mm
    Package Weight 1 lb
    Dimensions 14 x 12 x 6 in

     

     

    For Europlacer ii-A1 and ii-A2 and iineo+ machines

  • Yamaha YS Feeder Finger
    $200.00 S&H

    IPulse F3 Feeder Finger (Case of 10)

    For I-Pulse F3 Feeders

    10 Feeder Fingers per case

     

    The F3 Feeder Finger is designed to work with the iPulse F3 Electronic Feeders. The plow blade design folds and creases the cover tape out of the way of the pick and place and is discarded at the front of the machine with the empty tape.  The Feeder Finger coupled with the F3 feeder allows the operator to load tape strips as short as 3″ / 76.5mm or the full reel in less than 5 seconds with no component loss. Eliminating the cover tape collection eliminates feeder jams during production and improves machine utilization and throughput.

     

    Key benefits:

    • Attaches easily to your existing feeder
    • Handles cut-tape as short as 3″ / 76.2mm
    • Eliminates splicing
    • Loads in less than 5 seconds
    • Eliminates cover tape jams
    • Reduces setup time by fifty-percent
    Cut Tape Feeder Finger Specification
    Typical components 0201 / 1206
    Tape Width 8 mm
    Tape depth (feeder type) 2.5 mm (8 mm)
    Tape material Paper Tape
    Full Reels or Cut Tape Yes

     

    Package Weight 3 lbs
    Dimensions 14 x 12 x 6 in

     

    For I-Pulse F3 Feeders
    10 Feeder Fingers per case

  • $200.00 S&H

    Samsung SM 2MM Pitch Feeder Finger (Case of 8)

    For Samsung SM 2MM Pitch Feeders

    8 Feeder Fingers per case

     

    The SM 0402 Feeder Finger is designed to work with the Samsung 2mm Pitch Pneumatic Feeders to improve feeder efficiency and significantly reduce feeder setup and change over time. The key features and benefits allow the operator to load tape strips as short as three inches or the full reel in 5 seconds with zero component loss. Eliminating the cover tape collection process eliminates feeder jams during production improving machine utilization and throughput.

     

     

    Key benefits:

    • Attaches easily to your existing feeder
    • Handles cut-tape as short as 3″ / 76.2mm
    • Eliminates splicing
    • Loads in less than 5 seconds
    • Eliminates cover tape jams
    • Reduces setup time by fifty-percent
    Cut Tape Feeder Finger Specification
    Typical components 0201 / 0402
    Tape Width 8 mm
    Tape depth (feeder type) 2.5 mm (8 mm)
    Tape material Paper only
    Full Reels or Cut Tape Yes
    Package Weight  3 lbs
    Dimensions 14 x 12 x 6 in

    For Samsung SM 2MM Pitch Feeders
    8 Feeder Fingers per case