-
Juki RF08AS Feeder Finger (Case of 10)
For Juki RF08AS Feeders
10 Feeder Fingers per case
Using the RF08AS Feeder Finger requires a firmware upgrade from Juki Automation Systems, Inc.
ATS designed the RF08AS Feeder Finger in conjunction with Juki Automation Systems to work with the New RS1 pick and place machine. The Feeder Finger, coupled with the new RF08AS electronic feeder, adds critical features and benefits that improve machine utilization and throughput. An unskilled operator can load tape strips as short as 3” /76.2mm or a full reel without a cover tape leader or tape splicing. The cover tape collection process and cover tape feeder jams are eliminated. The operator merely pushes the component tape into the feeder and places it onto the pick and place or feeder cart improving production setup time by 80%.
Key benefits:
- Attaches easily to your existing feeder
- Handles cut-tape as short as 3″ / 76.2mm
- Eliminates tape splicing
- Loads in less than 5 seconds
- Eliminates cover tape jams
- Reduces setup time by eighty-percent
Cut Tape Feeder Finger Specification Typical components 0201 / 1206 Tape Width 8 mm Tape depth (feeder type) 2.5 mm (8 mm) Tape material Paper Tape only Full Reels or Cut Tape Yes Package Weight 3 lbs Dimensions 14 x 12 x 6 in -
Juki CF081ER Feeder Finger(Case of 8)
Works with Juki CF081ER Feeders
8 Feeder Fingers per kit
The Juki Feeder Fingers are precision machined tape guides designed to replace the original guide on Juki feeders. The finger uses a plow blade to detach and fold the cover tape out of the way of the pick and place, eliminating the cover tape routing and collection process. The plow blade design allows feeding of cut tape down to 1″ / 25.4mm. The operator can load the feeder in less than five seconds without component loss at setup. The Feeder Finger reduces feeder setup and changer time by 80%. See specification
Key benefits:
- Attaches easily to your existing feeder
- Handles tape strips as short as 1.5″ / 38.1mm
- Eliminates cover tape splicing
- Loads in less than 5 seconds
- Eliminates cover tape jams
- Reduces setup time by eighty-percent
Cut Tape Feeder Finger Specification Typical Components 0603 – 1206 Tape Width 8 mm Tape depth (feeder type) 2.5 mm (8 mm) Tape Material Embossed and Paper Tapes Full Reels and Cut Tape Yes Package Weight 3 lbs Dimensions 14 x 12 x 6 in -
Juki CF081E Feeder Finger (Case of 8)
For Juki CF081E Feeders
8 Feeder Fingers per kit
The CF Feeder Fingers add a new dimension to Juki mechanical feeders.
Installing the Feeder Finger provides cut tape relief for tape as short as 1.5″ / 38.2mm without attaching a cover tape leader. Removing the cover tape collection process eliminates feeder jams and machine stops during production. Terminating the mechanical mechanisms for collecting the cover tape reduces feeder maintenance.
Key benefits:
- Attaches easily to your existing feeder
- Handles cut tape as short as 1.5″ /38.2mm
- Eliminates splicing
- Loads in less than 5 seconds
- Eliminates cover tape jams
- Reduces setup time by eighty-percent
Cut Tape Feeder Finger Specification Typical Components 0603 – 1210 Tape Width 8 mm Tape depth (feeder type) 2.5 mm (8 mm) Tape Material Paper Tape Only Full Reels or Cut Tape Yes Package Weight 1 lbs Dimensions 14 x 12 x 6 in -
Juki AF081E Feeder Finger (Case of 8)
Works With Juki AF081E, AF05HP and AQ02HP Feeders
8 Feeder Fingers per case
The AF08 Feeder Finger was designed in conjunction with Juki Automation Systems to work with the AF081E mechanical feeder (blue handle) and the AF05HP & AQ02HP 2mm pitch feeders.
The AF feeder is Juki’s spliceable feeder, installing the Feeder Finger removes the cover tape tension issues associated with this feeder while providing a solution for feeding short strips of paper tape without attaching a cover tape leader. Eliminating the cover tape collection process eliminates feeder jams during production improving machine utilization and throughput. Eliminating the cover tape collection mechanism reduces feeder maintenance.
Key benefits:
- Attaches easily to your existing feeder
- Handles tape strips as short as 3″ /76.2mm
- Eliminates splicing
- Loads in less than 5 seconds
- Eliminates cover tape jams
- Reduces setup time by fifty-percent
Cut Tape Feeder Finger Typical components 0201 – 1206 Tape Width 8 mm Tape depth (feeder type) 2.5 mm (8 mm) Tape material Paper Tape only Full Reels or Cut Tape Yes Package Weight 3 lbs Dimensions 14 x 12 x 6 in